InCarTec

Volkswagen, Seat and Skoda car radio fascia adapter panel to allow the fitting of an aftermarket Double DIN stereo upgrade.The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.The fascia adapter panel t..

This is for power supply and speakers only. The cable is  to connect Daihatsu, Perodua, Scion, Subaru, Toyota cars  to an after-market European car radio with ISO style connectors.For all Toyota cars with standard audio systems (without amplifiers)For cars with steering..

Adaptor cable to convert Volkswagen Beetle Polo  Caddy 2015 onward and Transporter T6 vans with quadlock connectors to a standard ISO connector for fitting an aftermarket head unit. The harness has a built in CANbus interface that provides a key present ignition power supply to the radio, ..

Allows you to retain the original OEM factory fitted camera when installing a new aftermarket head unit on select Toyota, Scion and Subaru car models (Display and navigation model radios only).{ vehicle_compatibility } If adding an aftermarket camera to the original system please..

Provide a full sound upgrade to your Jaguar front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various Ford, Jaguar vehicles including the E, F and I-Pace, as well as the XE, XF and XJ. Please see our compatibility list for more cars that can benefit fr..

Provide a sound upgrade to your Daihatsu, Lexus, Scion, Toyota front or rear doors with our 165mm (6.5 inch) speaker upgrade fitting kit.This kit fits various Toyota vehicles including Alphard, Auris, Avensis, Hilux, RAV4 and Lexus RX. Please see our compatibility list for more cars that can ben..

Provide a full sound upgrade to your Toyota, Saab 92x or Subaru Impreza front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. Please see our compatibility list for more cars that can benefit from this upgrade kit.  This speaker upgrade kit offers a significant upgr..

Replacement car audio fascia to enable you to change the original radio in the car to a single or double DIN aftermarket version{ vehicle_compatibility }This fascia is suitable for cars with a display above the radio. The hazard and lock switch is built into some versions of the original rad..

Complete stereo upgrade kit to install a Single DIN aftermarket radio and retain the use of the steering wheel controls in Ford KA (2009-2016) car models.Package IncludesSingle Din Car Audio Fascia Adaptor Panel (MATT BLACK) CAN Bus Steering Wheel Control Interface ISO Connections ISO..

ISO T cable for Jaguar with a 12 way connector behind radio. This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit. Use when fitting hands free car kits.Only for cars with the basic audio system without an amplifier. For cars with an amplifier and Alpine..

24 Way connector and voltage adapter to keep the use of the original fitted reverse camera with an aftermarket head unit.NOT SUITABLE FOR BIRDS EYE 360 camera system Connect the purple wire to the new head-units 12V reverse signal wire, black to ground. The interface drops the volta..

Shark Fin Antenna For DAB, FM and GPSKit includes 3 x 5m extension cables. The 12v power needed can either be via the red cable or can be supplied as a phantom feed via the FM coaxial cable. Can be mounted in new Mercedes and Audi cars using the adapter seals 70-917MB24 or 70-917VW25 ..

ISO adapter harness for fitting a new stereo in an Audi A4, A4 Cabriolet, A6 or A8 with an original RND-D (Navigation Plus) radio with BOSE amplified audio system.Also suitable for Audi TT built before November 2001 with BOSE amplified audio system.This harness adapts from the original ISO a..

ISO to ISO Amplifier Integration Interface4 channel adjustable ISO to ISO amplifier interface.Use to install a new radio in a car that has an original fit amplifier that takes a pre amplified audio feed.This interface converts the high level audio output of a new head unit to a low level..

Designed to fit any 165mm speaker, this pair of adjustable speaker baffles creates a flexible seal around the back of the speakers, protecting them from water that gets inside doors and interior panels. Additionally it provides a barrier stopping interference between sound from the front and rear of..

Chevrolet, Nissan, Renault, Vauxhall radio replacement adapter cable, allows the fitting of an aftermarket car stereo upgrade by adapting the original 20 pin Nissan connector to standard aftermarket ISO connectors.This cable includes the power and speaker supply. If the car has steering wheel co..

Complete stereo upgrade fitting kit to install a Single DIN aftermarket car stereo and retain use of the factory steering wheel audio controls in select Fiat Sedici and Suzuki SX4 car models with factory fitted standard radios.This fitting kit allows the fitting of an aftermarket Single DIN car ..

Replacement car audio fascia to enable you to change the original radio in the car to a double DIN after market version This fascia is a premium quality original Honda part, it gives a perfect finish and fit.Size: 184mm x 104mmIncludes space for Hazard warning switch and air bag warning ligh..

Package IncludesInCarTec CAB-SEATHEAT Seat Button Relocation Harness (Cars With Heated Seats) InCarTec Hazard Relocation & Central Locking Switch HAT7Seat Ibiza Button Relocation HarnessThis is used to relocate the original hazard and passenger airbag buttons when fitting an a..

This cable includes the power and speaker supply. If the car has steering wheel controls then use item 29-670 instead. Harness AdaptorsConnect the head unit to the original radio connector without the need to cut any of the existing wiring.TECHNICAL NOTECAR AUDIO FITTING ACCE..