Lexus All Models

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

PAC RP4.2-TY11The RadioPRO RP4.2-TY11 radio replacement interface is designed for 2004-2019 Toyota, Lexus, and Scion vehicle models. The module enables the installation of an aftermarket radio while retaining the factory steering wheel control functions and maintaining compatibility with the fac..

Package Includes:JL Audio C1-650x 6.5" 16.5cm 2 Way Yellow Cone Car Speakers 165mm Speaker Adaptor Panels Speaker Adaptor Cables Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit{ vehicle_compatibility }C1-650xCoaxial Speaker System: 6.5-inch ..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Designed to fit any 200mm speaker, this pair of adjustable speaker baffles creates a flexible seal around the back of the speakers, protecting them from water that gets inside doors and interior panels. Additionally it provides a barrier, stopping interference between sound from the front and rear o..

A pair of premium high-end BLAM 690RC (6 X 9 INCH) coaxial speakers.This system includes two 6"x9" woofers, with coaxial 25mm (1") soft dome tweeters and two integrated 6 dB/octave crossovers.The BLAM 690RC are designed to provide incredible performance. Because of their high ..

A pair of premium high-end BLAM 690RS (6 X 9 INCH) 2-Way component speakers.System includes two 6»x9» woofers, 2 tweeters with flush-and surface-mount hardware included, and 2 external in-line 6 dB/Oct. high-pass crossovers with adjustable tweeter level 0 Db or -3 dBMax power ..

Add Camera to OEM Lexus 28 Pin ConnectorThis 28 pin camera adapter cable allows you to add an aftermarket rear view camera to OEM monitors on Toyota Land Cruiser and Lexus IS models with MFD GEN5 multi-displays.Power of the additionally installed rear view camera should be taken from the A..

Package IncludedPhoenix Gold ZDST6CX 6.5” (165mm) 2-Way Coaxial Speakers Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker KitZDST6CXThe ZDST6CX is a high-quality 6.5-inch speaker upgrade kit for a variety of different Lexus models (For specific models p..

Complete fitting kit to install a Single/ Double DIN head unit and retain the original steering wheel controls in Lexus RX (2003-2009) vehicles with factory fitted Mark Levinson Navigation systems. This fitting kit will also retain use of the top screen for both navigation and air con visualisation ..

A pair of complete front door car speaker adapter panels for 200mm (8 inch) speakers.These MDF panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 200 mm Installation cutout: 182 mm Ring height: 28 mm..

Lexus Antenna Adaptor. For Aftermarket Radio With DIN Antenna ConnectorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, conve..

40 pin camera adapter cable to allow you to add an aftermarket rear view NTSC camera to OEM monitors on Toyota Prius/ Lexus RX models with MFD GEN5 multi-displays.Only suitable for NTSC camerasThis cable allows you to connect rear view cameras in Toyota / Lexus cars with OEM multimedia s..

Complete fitting kit to install a Single/ Double DIN head unit and retain the original steering wheel controls in Lexus RX (2003-2009) vehicles with factory fitted Mark Levinson Navigation systems. This fitting kit will also retain use of the top screen for both navigation and air con visualisation ..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

This cable allows you to add an aftermarket back-up NTSC camera to various Lexus cars (2012 Onwards) with GEN7/GEN8/GEN9 Media-Navigation Systems.Only suitable for 59 pin and 16 pin connectionES series cars of 2012-2018 MY are not supported!..

Amplifier bypass cable for Lexus IS 200,GS430,, LS430, RX300.  Allows you to connect a new aftermarket radio directly to the cars speakers after bypassing the original amplifier which is behind the passenger glovebox.Fots cars with Lexus Amplifier On RX300 the amplifier is behind the rear..

A pair of front door car speaker adapter panels for 6X9 inch speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Fits various Lexus and Toyota vehicle models. Please see long description for compatibility and fitment details..

Amplifier bypass cable for Lexus RX (XU30) built between 2004 - 2006 with original Mark Levinson Sound System Allows you to connect a new aftermarket radio directly to the cars speakers after bypassing the original amplifier which is under the rear seat.Not suitable for later 2007-2009 Lexus ..