InCarTec

Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Suzuki Jimny (2018 Onwards) vehicles.Package IncludesDouble DIN Car Audio Facia Adaptor Panel (GLOSS BLACK) Steering Control Interface With Phone Buttons ..

4 Pack of Panel tools to help remove dashboard trim panels. A must have for any installer who has to remove plastic trim, to avoid damage to the delicate finishes on both interior and exterior trim. These trim tools are made from a nylon with a non-damaging finish to avoid cosmetic blemishes to the ..

Speaker adapter cables;  used to connect after market speakers to the original loom on multiple Audi and Seat modelsFits most Audis built after 2002, the Seat Exeo (2008-2013) and the Seat Leon Mk3 (2013-2019)May not fit all versions of every vehicle. Some amplified and named sound syst..

Fakra DAB Male to DAB SMB Female Antenna Adaptor cable (50cm)Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units)For a bulk pack of 10, please use 21-037B..

ISO adapter harness for Volkswagen group vehicles with quadlock connectors at the back of the radio.This adapter harness is designed to adapt from the original quadlock style connector in the dashboard to a standard aftermarket ISO connector to allow the fitting of a new radio.This lead has ..

A pair of speaker adapter cables for various Abarth, Fiat, Ford, Mazda and Jaguar vehicle models. Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.May not fit all versions of every vehicle. Some amplified and named sound systems such as BOSE, or Bow..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Provides power and speaker connections from the car.This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.Suitable for Honda Ci..

InCarTec 10-603 Start Stop Voltage StabiliserPlug and play voltage stabiliser on ISO power cable for use with aftermarket car radios on "start stop" cars for cars that have  both ignition and permanent feeds drop off during engine crankFeaturesOperating input voltage 7vdc to 12vd..

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, mo..

Provide a sound upgrade to your Toyota, Citroen C1, Peugeot 108, Scion or Subaru front or rear doors with our 165mm (6.5 inch) speaker upgrade fitting kit.Please see our compatibility list for more cars that can benefit from this upgrade kit.This fitting kit allows the fitting of new after..

Provide a full sound upgrade to your Abarth, Citroen, Fiat or Vauxhall front or rear doors with our complete 165mm (6.5 inch) RECOIL coaxial speaker upgrade fitting kit.Each fitting kit contains a set of Recoil Echo-Series RCX65 165mm (6.5 inch) 200 watt 2-way full-range coaxial speakers.Thi..

20 Amp RCA Stereo Ground Loop Isolator/ Audio Signal / Amplifier Noise FilterEliminates ground loop noise between the audio source and radio. Stops alternator "whine" and ignition "ticking".Used to solve noise problems in Car audio audio systems and AUX in situations...

This is for power supply and speakers only. The cable is  to connect Daihatsu, Perodua, Scion, Subaru, Toyota cars  to an after-market European car radio with ISO style connectors.For all Toyota cars with standard audio systems (without amplifiers)For cars with steering..

Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in 2014 onwards Fiat Ducato, Citroen Relay and Peugeot Boxer, Vauxhall Movano vehicles.Package IncludesDouble Din Fascia With Side Fix Brackets (GLOSS BLACK) S..

Complete fitting kit to change the original radio in a (2013-2019) Hyundai I10 (WITH STEERING WHEEL CONTROLS) for a Double DIN after market unit.Package IncludesDouble Din Fascia with Brackets (Matt Black) Steering wheel control interface AM/FM Antenna Adaptor Universal patch lead (..

Designed to fit any 165mm speaker, this pair of adjustable speaker baffles creates a flexible seal around the back of the speakers, protecting them from water that gets inside doors and interior panels. Additionally it provides a barrier stopping interference between sound from the front and rear of..

Complete fitting kit to install a double DIN head unit, Double DIN side fitting fascia brackets. these brackets fit directly onto the side of the new radio chassis so the cage provided with the kit will not be used. There is a very slight gap above the new radio after using this kit.Package Inc..

Radio adapter cable for Mercedes vehicles with original Audio 5 (Sound 5) radios to allow the fitting of an aftermarket stereo upgrade.The adapter cable is plug and play with a built in CANbus ignition interface so not hard wiring is required.ISO radio adapter harness for Mercedes cars with ..

Shark Fin Antenna For DAB, FM and GPSKit includes 3 x 5m extension cables. The 12v power needed can either be via the red cable or can be supplied as a phantom feed via the FM coaxial cable. Can be mounted in new Mercedes and Audi cars using the adapter seals 70-917MB24 or 70-917VW25 ..

A pair of speaker adapter cables for various Abarth, Fiat, Ford, Mazda and Jaguar vehicle models. Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.May not fit all versions of every vehicle. Some amplified and named sound systems such as BOSE, or Bow..