Saab

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Car Audio Stereo Installation kit for installing a new after market Double din headunit into your Saab. This is complete kit including Fascia Trim Panel, Steering Control Interface for Volume Controls on Steering Wheel, Aerial Adaptor.Package Includes:Double Din Fascia Panel Adaptor ..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..

Car Audio Steering wheel control interface allowing use of the original buttons with a new aftermarket head-unit.Suitable for Saab 9-3/ 9-5 cars with GM LAN bus connectors behind the radio.This interface provides ignition, illumination, speed pulse, reverse gear signal for 9-3 models and Ign..

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in a Saab 9-5 (2006 - 2010) vehicle with a basic original GM radio (Non-navigation)Package IncludesSingle/Double DIN Fascia Steering Control Interface Bose/Harmon Ka..

Car Audio Stereo Installation kit for installing a new after market Double din headunit into your Saab. This is complete kit including Fascia Trim Panel and Steering Control Interface for Volume Controls on Steering Wheel.Package Includes:Double Din Fascia Panel Adaptor (Black) Frame..

The BLAM RELAX 130 RFS is the updated version of the popular 130RS stand-alone series. The playback range of the new RFS version has been increased compared to the previous model (80Hz – 28kHz). The completely renewed composite frame also contains a renewed, stronger connector terminal than be..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Car audio metal cage kit and trim 103mm high. Needed with some double din fascias that do not fit the normal 113mm cages supplied with aftermarket head-units.This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation s..

For Saab cars cars made after 2006 with newer twin GM style connector.  Cable to connect the cars harness to an after-market European car radio with ISO style connectors.Provides power and speaker connections with flying lead for connection to an ignition supply.{ vehicle_compatibility ..

Complete stereo upgrade kit to install a Double DIN aftermarket car stereo and retain the use of the steering wheel controls in a SAAB 9-3 (2006-2013) vehicle, originally fitted with either the Delphi Grundig head unit or the Fujitsu Ten head unit.Package IncludesDouble Din Fascia Adaptor..

ISO to ISO Amplifier Integration Interface4 channel adjustable ISO to ISO amplifier interface.Use to install a new radio in a car that has an original fit amplifier that takes a pre amplified audio feed.This interface converts the high level audio output of a new head unit to a low level..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Package Includes:1 x Alpine 3-1/2" (8.6cm) Coaxial 2-Way SpeakerFeatures:Peak Power 150W RMS Power 20W Frequency Response: 120Hz-16kHz Sensitivity: 89dB/W/m Ferrite Magnet Long Fibre Natural Pulp Cone Alnico Magnet Piezo Tweeter High Polymer Foam EdgeDimensi..

Car Audio Stereo Installation kit for installing a new after market Double din headunit into your Saab. This is complete kit including Fascia Trim Panel and Steering Control Interface for Volume Controls on Steering Wheel.Package Includes:Double Din Fascia Panel Adaptor (Black) Frame..

Package IncludesPioneer SPH-DA77DAB 6.8" WVGA Capacitive Multi-touch Panel Screen Weblink 3.0 Android Auto/ Apple CarPlay DAB Car Stereo DAB Aerial Double Din Fascia Adaptor Double Din Metal Cage Kit Steering Wheel Control Interface Amplifier Retention Interface FM Antenna Ad..

Package IncludesPioneer SPH-DA160DAB 6.8" Capacitive Touch Screen Bluetooth Apple Car Play DAB DAB Antenna Aerial Double Din Fascia Adaptor Double Din Metal Cage Kit Steering Wheel Control Interface Amplifier Retention Interface FM Antenna Adaptor Stereo Patch Lead{ v..

Package IncludesKenwood DMX6523DABS 6.8" WSVGA Screen Wireless CarPlay / Android Auto, Mirroring, DAB+ Bluetooth Stereo DAB Aerial Double Din Fascia Adaptor Double Din Metal Cage Kit Steering Wheel Control Interface Amplifier Retention Interface FM Antenna Adaptor Stereo Pa..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..