Holden

Fakra DAB Male to DAB SMB Female Antenna Adaptor cable (50cm)Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units)For a bulk pack of 10, please use 21-037B..

Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units){ vehicle_compatibility }Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modi..

This cable allows you to connect an aftermarket car radio with European iso connectors  to the cars wiring using the original connectors in the car.{ vehicle_compatibility }For cars with Steering controls use 29- series cablesHarness AdaptorsConnect the head unit to the orig..

Car audio metal cage kit and trim 103mm high. Needed with some double din fascias that do not fit the normal 113mm cages supplied with aftermarket head-units.This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation s..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes ISO power and speaker wiring to connect the car to the aftermarket head-unit. This interface will retain the use of the steering wheel audio controls with an aftermarket head..

Patch lead for use with 20-XXX-SWC ISO steering wheel control cables to convert from 2 wire learning to 3.5mm jack.Use with self learning programable aftermarket units like Blaupunkt, Grundig or Road Angle. Also for some Kenwood, JVC and Sony units using their "CUSTOM" setting for stee..

Sony 103mm High Double Din Radio CageSONY Radio metal Cage kit designed for 1 DIN chassis (182 x 103mm)Current Sony double DIN radios with single Din Chassis are supplied with a 2 DIN size cage (180mm x 113mm)This cage does not fit some common fascia’s such as Land Rover Discovery ..

Discover the Blam Relax 100 RFC, a 4 inch (10cm) coaxial speaker precisely designed to take your car audio sound to a new level. No one can resist the powerful maximum power of 100W and a nominal power of 50W. In addition, the 20mm soft dome tweeter fits perfectly into the integrated 6 dB/oct. cross..

Package IncludesPioneer GM-DX104 4 Channel Class D Bridgeable Car Amplifier 400W InCarTec Quadlock Connector ISO Mute SOT Cable{ vehicle_compatibility }GM-DX104Compact, space saving, easy to install micro 4-Channel amplifier (400 W) featuring High Resolution Audio, Class-D Tec..

ISO adapter harness for Vauxhall vehicles with quadlock connectors at the back of the radio.This adapter harness is designed to adapt from the original quadlock style connector in the dashboard to a standard aftermarket ISO connector to allow the fitting of a new radio.This lead has a built ..

A pair of rear side panel car speaker adapter panels for 100-120mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 100 - 120 mm Installation cutout: 91.5 mm + 112.5 mm Ring outside: ..

Upgrade your vehicle with our Connects2 CTK9 Complete Installation Kit designed to deliver a seamless, professional infotainment upgrade in one box. This all-in-one solution includes a premium 9" fascia, steering wheel control interface, and all essential accessories, allowing you to install a ..

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 142 mm Ring outside: 163.5 mm Ring height: 13 ..

CANBUS interface to maintain the steering wheel controls. This interface will also adapt from the quadlock connector in the car to standard after market ISO connectors. Provides a CANbus, powered antenna, ignition output, speed pulse, reverse gear signal and hand brake signal. This interface will..

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 145 mm Ring outside : 268.8 / 197 mm Ring heig..

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in select Vauxhall vehicles.Package IncludesDouble Din Fascia (MATT CHROME/ SILVER) Double DIN Fitting Cage Steering Control Interface Fakra to DIN Aerial Adaptor,..

Standard two prong radio (Double Din) Release keys used on Blaupunkt, VDO, Philips style radiosSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent s..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Fits various Abarth, Alfa Romeo and Fiat car models. Please see long description for compatibility and fitment det..

Patch cable set to connect a UNICAN interface between an after market head unit and the steering wheel controls.Can be used with Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack.{ vehicle_compatibility }Th..