Holden Astra

Fakra DAB Male to DAB SMB Female Antenna Adaptor cable (50cm)Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units)For a bulk pack of 10, please use 21-037B..

Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units){ vehicle_compatibility }Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modi..

Sony 103mm High Double Din Radio CageSONY Radio metal Cage kit designed for 1 DIN chassis (182 x 103mm)Current Sony double DIN radios with single Din Chassis are supplied with a 2 DIN size cage (180mm x 113mm)This cage does not fit some common fascia’s such as Land Rover Discovery ..

Car audio metal cage kit and trim 103mm high. Needed with some double din fascias that do not fit the normal 113mm cages supplied with aftermarket head-units.This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation s..

Patch cable set to connect a UNICAN interface between an after market head unit and the steering wheel controls.Can be used with Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack.{ vehicle_compatibility }Th..

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector.The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is..

Package IncludesPioneer SPH-DA160DAB 6.8" Capacitive Touch Screen Bluetooth Apple Car Play DAB DAB Antenna Aerial Double Din Fascia (MATT CHROME/ SILVER) Double DIN Fitting Cage Steering Control Interface Fakra to DIN Aerial Adaptor, 12v Phantom Power Stereo patch lead{..

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in select Vauxhall vehicles.Package IncludesDouble Din Fascia (MATT CHROME/ SILVER) Double DIN Fitting Cage Steering Control Interface Fakra to DIN Aerial Adaptor,..

ISO adapter harness for Volkswagen, Vauxhall, Holden group vehicles with quadlock connectors at the back of the radio.This adapter harness is designed to adapt from the original quadlock style connector in the dashboard to a standard aftermarket ISO connector to allow the fitting of a new radio...

FLUSH FIT car radio fascia panel adapter with fitting cage to allow the fitting of an aftermarket Double DIN stereo upgrade in various Holden and Vauxhall cars.This fascia kit gives a professional flush mount finish to the installation.172mm x 98mmThis fascia adapter panel is to fit a do..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

172mm x 98mm. Vauxhall Astra J & Holden Astra PJ Complete replacement car audio fascia to enable you to change the original radio in the car to a double din aftermarket version.Use a pocket if you wish to fit a single din unit.The kit has side fixing brackets which attach on the the side..

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 144.5 mm ring outside : 163.5 mm Ring Height: ..

CANBUS interface to maintain the steering wheel controls. This interface will also adapt from the quadlock connector in the car to standard after market ISO connectors. Provides a CANbus, powered antenna, ignition output, speed pulse, reverse gear signal and hand brake signal. This interface will..

ISO T cable for Vauxhall, Holden & Pontiac cars with 2 digit radios like CD30, CD40 CD70, Cable has all 40 wires filled to  cope with all model radios. This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit. Use when fitting hands-free car ..

This fascia adapter panel is to fit a double din aftermarket radio. The fascia adapter allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.FLUSH FIT car radio fascia panel adapter with fitting cage to allow the fitting of an..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. If f..