Holden All Models

Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units){ vehicle_compatibility }Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modi..

Fakra DAB Male to DAB SMB Female Antenna Adaptor cable (50cm)Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units)For a bulk pack of 10, please use 21-037B..

Patch lead for use with 20-XXX-SWC ISO steering wheel control cables to convert from 2 wire learning to 3.5mm jack.Use with self learning programable aftermarket units like Blaupunkt, Grundig or Road Angle. Also for some Kenwood, JVC and Sony units using their "CUSTOM" setting for stee..

Package IncludesSTINGER IE268E 6.8" Screen Wireless Apple Carplay / Android Auto, Bluetooth, DAB+ Stereo DAB Aerial Double Din Fascia (MATT CHROME/ SILVER) Double DIN Fitting Cage Steering Control Interface Fakra to DIN Aerial Adaptor, 12v Phantom Power Stereo Patch Lead..

Car audio metal cage kit and trim 103mm high. Needed with some double din fascias that do not fit the normal 113mm cages supplied with aftermarket head-units.This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation s..

This cable includes the power and speaker supply. If the car has steering wheel controls then use item 29-670 instead. Harness AdaptorsConnect the head unit to the original radio connector without the need to cut any of the existing wiring.TECHNICAL NOTECAR AUDIO FITTING ACCE..

Package Includes:JL Audio C1-650x 6.5" 16.5cm 2 Way Yellow Cone Car Speakers 165mm Speaker Adaptor Panels Speaker Adaptor Cables Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit{ vehicle_compatibility }C1-650xCoaxial Speaker System: 6.5-inch ..

Package Includes:JL Audio C1-650x 6.5" 16.5cm 2 Way Yellow Cone Car Speakers 165mm Speaker Adaptor Panels Speaker Adaptor Cables Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit{ vehicle_compatibility }C1-650xCoaxial Speaker System: 6.5-inch ..

Discover the Blam Relax 100 RFC, a 4 inch (10cm) coaxial speaker precisely designed to take your car audio sound to a new level. No one can resist the powerful maximum power of 100W and a nominal power of 50W. In addition, the 20mm soft dome tweeter fits perfectly into the integrated 6 dB/oct. cross..

Sony 103mm High Double Din Radio CageSONY Radio metal Cage kit designed for 1 DIN chassis (182 x 103mm)Current Sony double DIN radios with single Din Chassis are supplied with a 2 DIN size cage (180mm x 113mm)This cage does not fit some common fascia’s such as Land Rover Discovery ..

Package IncludesPioneer GM-DX104 4 Channel Class D Bridgeable Car Amplifier 400W InCarTec Quadlock Connector ISO Mute SOT Cable{ vehicle_compatibility }GM-DX104Compact, space saving, easy to install micro 4-Channel amplifier (400 W) featuring High Resolution Audio, Class-D Tec..

Patch cable set to connect a UNICAN interface between an after market head unit and the steering wheel controls.Can be used with Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack.{ vehicle_compatibility }Th..

Adapter cable to connect various General Motors cars and trucks to standard ISO connectors to enable the fitting of an aftermarket head unit.This adapter harness is designed to adapt from the original 44 Pin connector in the dashboard of various Chevrolet, Cadillac, Vauxhall, Opel, Holden vehicl..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This kit is supplied with side fixing brackets to mount the new radio for a flush fit, so no cage is required. For single DIN fitting a universal pocket will need to be acquired. ..

Side fixing car radio fascia panel adapter with side fixing brackets to allow the fitting of an aftermarket Double DIN stereo upgrade in various Vauxhall & Holden cars.This fascia kit gives a professional flush finish to the installation, and doesn't require a radio cageThis fascia a..

Use this cable to retain an original fitment camera when fitting a new head unit.For General Motors (GM), Chevrolet, Cadillac, and GMC cars and trucks with original equipment navigation and reverse camera which use a 20 pin plug. Check vehicle before ordering for this plug, cars within these yea..

This retention reverse camera adapter designed for selected Holden cars. This interface retains the factory/ OEM fitted reverse view camera when replacing the original stereo with a new upgraded aftermarket head unit.This interface is compatible with all touch screen models from 2012 onwards...

ISO adapter harness for Volkswagen, Vauxhall, Holden group vehicles with quadlock connectors at the back of the radio.This adapter harness is designed to adapt from the original quadlock style connector in the dashboard to a standard aftermarket ISO connector to allow the fitting of a new radio...

Package IncludesPioneer SPH-DA160DAB 6.8" Capacitive Touch Screen Bluetooth Apple Car Play DAB DAB Antenna Aerial Double Din Fascia (MATT CHROME/ SILVER) Double DIN Fitting Cage Steering Control Interface Fakra to DIN Aerial Adaptor, 12v Phantom Power Stereo patch lead{..