Holden

Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units){ vehicle_compatibility }Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modi..

Fakra DAB Male to DAB SMB Female Antenna Adaptor cable (50cm)Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units)For a bulk pack of 10, please use 21-037B..

Car audio metal cage kit and trim 103mm high. Needed with some double din fascias that do not fit the normal 113mm cages supplied with aftermarket head-units.This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation s..

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector.The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is..

Patch lead for use with 20-XXX-SWC ISO steering wheel control cables to convert from 2 wire learning to 3.5mm jack.Use with self learning programable aftermarket units like Blaupunkt, Grundig or Road Angle. Also for some Kenwood, JVC and Sony units using their "CUSTOM" setting for stee..

Sony 103mm High Double Din Radio CageSONY Radio metal Cage kit designed for 1 DIN chassis (182 x 103mm)Current Sony double DIN radios with single Din Chassis are supplied with a 2 DIN size cage (180mm x 113mm)This cage does not fit some common fascia’s such as Land Rover Discovery ..

Discover the Blam Relax 100 RFC, a 4 inch (10cm) coaxial speaker precisely designed to take your car audio sound to a new level. No one can resist the powerful maximum power of 100W and a nominal power of 50W. In addition, the 20mm soft dome tweeter fits perfectly into the integrated 6 dB/oct. cross..

Patch cable set to connect a UNICAN interface between an after market head unit and the steering wheel controls.Can be used with Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack.{ vehicle_compatibility }Th..

FLUSH FIT car radio fascia panel adapter with fitting cage to allow the fitting of an aftermarket Double DIN stereo upgrade in various Holden and Vauxhall cars.This fascia kit gives a professional flush mount finish to the installation.172mm x 98mmThis fascia adapter panel is to fit a do..

Package IncludesPioneer SPH-DA150BT Mechafree 6.8" Capacitive Touchscreen Apple CarPlay / Android Auto Bluetooth Stereo Double Din Fascia (MATT CHROME/ SILVER) Double DIN Fitting Cage Steering Control Interface Fakra to DIN Aerial Adaptor, 12v Phantom Power Stereo Patch Lead ..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 142 mm Ring outside: 163.5 mm Ring height: 13 ..

This cable includes the power and speaker supply. If the car has steering wheel controls then use item 29-670 instead. Harness AdaptorsConnect the head unit to the original radio connector without the need to cut any of the existing wiring.TECHNICAL NOTECAR AUDIO FITTING ACCE..

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in select Vauxhall vehicles.Package IncludesDouble Din Fascia (MATT CHROME/ SILVER) Double DIN Fitting Cage Steering Control Interface Fakra to DIN Aerial Adaptor,..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

ISO adapter harness for Vauxhall vehicles with quadlock connectors at the back of the radio.This adapter harness is designed to adapt from the original quadlock style connector in the dashboard to a standard aftermarket ISO connector to allow the fitting of a new radio.This lead has a built ..

ISO adapter harness for Volkswagen, Vauxhall, Holden group vehicles with quadlock connectors at the back of the radio.This adapter harness is designed to adapt from the original quadlock style connector in the dashboard to a standard aftermarket ISO connector to allow the fitting of a new radio...

ISO T cable for Vauxhall, Holden & Pontiac cars with 2 digit radios like CD30, CD40 CD70, Cable has all 40 wires filled to  cope with all model radios. This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit. Use when fitting hands-free car ..

Provide a full sound upgrade to your front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various GM vehicles including Chevrolet, Holden, Vauxhall and Saab 9-4X  . Please see our compatibility list for more cars that can benefit from this upgrade ki..

Complete fitting kit to install a Double DIN head unit and retain the original steering wheel controls in Isuzu D Max and Isuzu MU-X & Holden Colorado vehicle model.Package IncludesDouble Din Fascia (Matt Black) Steering Wheel Control Interface Antenna Adaptor Universal pat..