Porsche

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Complete stereo upgrade kit to install a single or double DIN aftermarket radio in a Porsche Boxster, Cayman or 911 cars without Bose audio.Package Includes:Single / Double Din Silver Flush Mount Fascia Fitting Kit Antenna Adaptor Cable Car Radio Replacement Adaptor Cable CAN BUS Ig..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version Fits Porsche 986/996 car models WITHOUT THE TOP CUP HOLDERThe aftermarket Head unit mounts directly into the fascia so no need for an additional fitting cage.Some trim modi..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single / Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Importan..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single / Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fa..

Complete stereo upgrade kit to install a single or double DIN aftermarket radio in a Porsche Boxster, Cayman or 911 cars without Bose audio, and retain the use of the original steering wheel audio controls.Package Includes:Silver Flush Mount Fascia Fitting Kit Steering Wheel Control Int..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

A pair of ISO standard speaker adapter cables for various Abarth, Alfa Romeo, Audi, Citroen, Chrysler, Fiat, Holden, Iveco, Jaguar, Lancia, Peugeot, Porsche, Seat, Skoda, Renault, Vauxhall, Volkswagen And Volvo car vehicle models.Use to fit new aftermarket speakers without needing to cut off the..

Fakra to DIN Antenna Adaptor. For Aftermarket Radio With DIN Antenna Connector, converts car specific antenna connector to a DIN antenna connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adapto..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Experience superior sound quality in your car with our car speaker adapter - the ultimate aftermarket upgrade solution. Designed to fit 6.5”-6.75” speakers,..

Car Audio Stereo Installation kit for installing a new after market double din headunit into your Porsche. This is complete kit including Fascia Trim Panel, Steering Control Interface for Volume Controls on Steering Wheel, and Aerial Adaptor.Package IncludesDouble Din Fascia Fitting Kit (..

Radio Replacement Kit, allows the fitment of a Double DIN aftermarket headunit to the selected vehicle. This kit includes Fascia and Aerial Adaptor.Package Includes:Double Din Fascia (Black) Fakra to DIN Aerial Antenna Adaptor ISO to Din Antenna Aerial AdaptorPorsche 911 (996)..

Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in select Porsche 911, Boxster and Cayman (2012-2016) car models with PCM3.1 systems without Bose audio.Package IncludesDouble Din Fascia Kit (Matt Black) ..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Amplifier bypass cable for Porsche cars built after 2012 with PCM 3.0 and newer. Allows you to connect a new aftermarket radio directly to the cars speakers after bypassing the original amplifier which is under the front seat while retaining the original subwoofer and its dedicated amplifier.Aft..

The BLAM PO 200 is a 7.5" (192 mm) high-performance car speaker sold in pairs, specifically designed to directly replace the original Porsche speakers. Engineered in France by BLAM Audio, it delivers a significant improvement in low-frequency response, offering rich, controlled bass and clear m..

Package IncludesKenwood DMX7722DABS Wireless Apple CarPlay Android Auto Digital Media AV Receiver DAB Stereo DAB Aerial Single / Double Din Silver Flush Mount Fascia Fitting Kit Antenna Adaptor Cable Car Radio Replacement Adaptor Cable CAN BUS Ignition Interface{ vehicle_compa..

MOST fibre optic interface designed to retain the use of the original fibre optic amplifier in Porsche Boxster or 911 to allow the fitting of an aftermarket radio upgrade.The interface connects at the back of the radio, it takes the phono audio output from the new radio and converts it to a digi..