Complete stereo upgrade kit to install a single or double DIN aftermarket radio in a Porsche Boxster, Cayman or 911 cars without Bose audio.

Package Includes:

• Single / Double Din Silver Flush Mount Fascia Fitting Kit
• Antenna Adaptor Cable
• Car Radio Replacement Adaptor Cable
• CAN BUS Ignition Interface

Fascia Adaptor

This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.

This fitting kit includes a silver car radio fascia adapter panel to allow the fitting of an aftermarket single or double DIN car radio upgrade. The fascia adapter allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. Use the supplied pocket for a single DIN installation or remove the pocket for a double DIN installation.

CANBUS Ignition Interface

A Porsche ISO to ISO radio replacement adapter harness is in the kit. The adapter has a built in CANbus ignition interface that gives a key present ignition supply to the new radio. It also gives out a speed pulse signal for use when installing a navigation radio. It will also give audio in cars that have speaker wires in the original ISO connector. There is an amplifier turn on wire on this harness, this is for cars that have a non Bose amplifier that receives a normal speaker level audio signal from the head unit.

Aerial Adaptor

An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. 

This kit includes a male Fakra to Male DIN antenna adapter cable. This cable adapts from a Fakra antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade.

Below is an image of a stereo fitted using this fascia.

Important Fascia Notes

• The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.