Land Rover

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Landrover Range Rover VOGUE (99-02) with DSP and  HARMAN KARDON audio system.Car Audio Steering wheel interface and ISO cables and PHONO cables allowing use of original buttons with a new aftermarket head-unit. Provides power and LOW level PHONO speaker connections from the car.This car..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Package Includes:Alpine 10 cm 4" Coaxial 2-Way 180W Car SpeakerCustom Fit Speaker Features:Peak Power 180W RMS Power 25W Frequency Response: 100Hz-20kHz Sensitivity: 90dB/W/m Neodymium Magnet Mylar-Titanium Balanced Dome Tweeter Ferrite Magnet Long Fibre Natura..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Package Includes:Kenwood KSC-PSW7EQ Car Audio  Active Compact Under Seat Subwoofer Kenwood 4" 10cm Stage Sound Series 220W 2 Way Coaxial Car SpeakersKSC-PSW7EQ Compact Powered SubwooferMax Power 160W Wired Remote Controller Active EQ Technology Switch Class..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Car Audio Stereo Installation kit for installing a new after market double din headunit into your Landrover. This is complete kit including Fascia Trim Panel, Wiring Harness and Aerial Adaptor.Package Includes:Double Din Fascia (Black) Frame Only ISO Wiring Harness Aerial Adaptor..

Connects2 Steering Wheel Control Interface Adaptor installation. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your fa..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.{ vehicle_compatibili..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Audio interface with 4 channel adjustable line out put for connecting cars with OEM amplifiers to the ISO connectors of an aftermarket car radio.For cars fitted with original Clarion head-units with pink 10 pin ISO pre-amp socket at the back of the radio.This lead has  a 10 pin connecto..

Complete fitting kit to change the original radio in a Range Rover Sport or Discovery 3 with original Harman/Kardon LOGIC 7 amplified audio system for a double din aftermarket unit and also retain the use of the original nav/vehicle info display screen.Package IncludesPioneer SPH-DA160DAB..

The UNI-CHIME interface allows you to retain a vehicles original parking tones when upgrading to an aftermarket stereo. With an aftermarket audio system, certain features, like parking tones, can become lost via the CAN system. But with the application of the UNI-CHIME, this information can be re-in..

Complete fitting kit to change the original radio in a Range Rover Sport or Discovery 3 with original Harman/Kardon amplified audio system (not LOGIC7) for a Double DIN aftermarket unit and also retain the use of the original nav/vehicle info display screen.Package IncludesFascia With Cag..

Complete fitting kit to change the original factory fitted radio in a Freelander 2, Discovery 3 or Range Rover Sport with original standard radio and basic audio system for a Double DIN after market head unit.Package IncludesDouble Din Fascia Fitting Cage Steering Control Interface ..

Steering wheel control interface and harman/kardon amplifier adapter cable for Landrover Discovery 2 cars with original Alpine radios and harman/kardon amplified audio systems to fit an aftermarket radio upgrade.The cable adapts from the ISO connectors in the car to standard aftermarket ISO conn..

Package Includes:Infinity BASSLINK MINI Compact Under Seat Powered Subwoofer System Kenwood 4" 10cm Stage Sound Series 220W 2 Way Coaxial Car Speakers{ vehicle_compatibility }BASSLINK MINI Compact Under Seat Powered Subwoofer SystemInfinity BassLink MINI delivers deep bas..

Complete fitting kit to change the original radio in a Freelander 2 with original Alpine Premium sound system for a double din after market unit and retain the original parking sensor tones.Suitable for cars with or without original screen or navigation.Package IncludesDouble Din ..