Land Rover

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Package Includes:Alpine 10 cm 4" Coaxial 2-Way 180W Car SpeakerCustom Fit Speaker Features:Peak Power 180W RMS Power 25W Frequency Response: 100Hz-20kHz Sensitivity: 90dB/W/m Neodymium Magnet Mylar-Titanium Balanced Dome Tweeter Ferrite Magnet Long Fibre Natura..

Some fascias for Ford cars have a space to relocate a new passenger air bag light, if the vehicle does not have this as an original feature this card holder insert can be used to blank out the hole in the fascia instead of fitting a more expensive air bag light insert.Failure to refit the airbag..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Provides power and speaker connections from the car.Suitable for Landrover Discovery II, Freelander I and Rover 75 car models (With BMW round pin wiring){ vehicle_compatibilit..

Audio interface with 4 channel adjustable line out put for connecting cars with OEM amplifiers to the ISO connectors of an aftermarket car radio.For cars fitted with original Clarion head-units with pink 10 pin ISO pre-amp socket at the back of the radio.This lead has  a 10 pin connecto..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Amplifier bypass cable for Land Rover Range Rover L322 (Vogue) cars that have an original DSP amplifier and high line original head unit. This cable extends from the dashboard to the amplifier in the rear and bypasses the amplifier to allow a new stereo to work with the original speakers in the car...

Steering wheel control interface for Landrover Freelander cars, facelift models 2003 - 2006. Allows you to change the original head unit in the car with an after market unit and retain the use of the steering wheel audio controls.Includes amplifier turn on for Harmon Kardon models{ vehicle_c..

Audio cable for Landrover Defender vehicles. Converts   harness to female ISO connectors for connecting a after-market European car radio. Use for cars  with the standard audio system without Steering wheel control. Harness AdaptorsConnect the head unit to the original radio ..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Connects2 Steering Wheel Control Interface Adaptor installation. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your fa..

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket versionFits Land Rover - Discovery III (LR3) , Land Rover Freelander II (L359) , Land Rover Range Rover Sport (L320).Some Range Rover Sport models will have a gap along..

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitting A..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Car Audio Stereo Installation kit for installing a new after market double din headunit into your Landrover. This is complete kit including Fascia Trim Panel, Wiring Harness and Aerial Adaptor.Package Includes:Double Din Fascia (Black) Frame Only ISO Wiring Harness Aerial Adaptor..

Steering wheel control interface and harman/kardon amplifier adapter cable for Landrover Discovery 2 cars with original Alpine radios and harman/kardon amplified audio systems to fit an aftermarket radio upgrade.The cable adapts from the ISO connectors in the car to standard aftermarket ISO conn..

Complete fitting kit to change the original radio in a Range Rover Sport or Discovery 3 with original Harman/Kardon amplified audio system (not LOGIC7) for a Double DIN aftermarket unit and also retain the use of the original nav/vehicle info display screen.Package IncludesFascia With Cag..