Land Rover Defender 2010-2016 Single Din Stereo / DAB Antenna Fitting Kit
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 5
- Brand: Dynamic Sounds
- Model: FKIT-LANDROVER-22
- EAN: 7426871608467
- Warranty: 2 Years Warranty
Description
Product Compatibility Chart
Make | Model | Years | Notes |
Land Rover | Defender | 2010 - 2016 | LD |
Connection: OEM Specific
Land Rover Stereo Replacement Kit, allows the fitment of a single DIN aftermarket headunit to the selected vehicle. This kit includes Wiring Harness, Aerial Adaptor and Stereo Removal Keys.
Fitting Kit Includes:
- Wiring Harness
- Aerial Adaptor
- Stereo Removal Keys
- DAB Splitter Antenna
Suits Landrover Defender with newer style Grey plug NOT ISO CONNECTIONS This kit will provide FM / AM and DAB signal direct from original vehicle antenna using the supplied DAB splitter interface in the kit.
NO NEED FOR ADDITIONAL GLASS MOUNT ANTENNA USING THIS SET UP.
Wiring Harness
The wiring harness will allow to install the stereo. This adapter is required when replacing your factory fitted radio with an aftermarket radio. It will convert the original vehicle power & speaker wiring connectors to a standard ISO connector. Simply plug one end of the adapter into your cars wiring harness and the other into your new radio.
Aerial Adaptor
An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.
Stereo Removal Keys
Stereo Removal Keys to remove headunit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one of these units you will require a manufacturer specific stereo removal key to prevent damage to the head unit or the surrounding fascia and cage.
Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.
Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.