Hyundai

Fakra DAB Male to DAB SMB Female Antenna Adaptor cable (50cm)Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units)For a bulk pack of 10, please use 21-037B..

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Phoenix Gold ZDT-HYKI1 T-Harness AdaptorUpgrade your vehicle’s audio with our T-Harness. Our plug-and-play solution makes it easy to upgrade your audio by integrating seamlessly with our amplifiers. Built for a hassle-free installation, with everything you need included, no cutting or..

Special Interface for Hyundai and Kia Vehicles to maintain the cars existing AUX sockets but used them with a new aftermarket head-unit. This unit uses the cars original housingKeep the original USB and AUX socket in the car. Hyundai IX20, IX35, I40, Genesis, i10,i20 i30, i40 ..

Patch lead for use with 20-XXX-SWC ISO steering wheel control cables to convert from 2 wire learning to 3.5mm jack.Use with self learning programable aftermarket units like Blaupunkt, Grundig or Road Angle. Also for some Kenwood, JVC and Sony units using their "CUSTOM" setting for stee..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..

These adaptors will convert the non din-sized aperture left after removing the factory fitted stereo to a Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fasc..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Hyundai Antenna Adaptor. For Aftermarket Radio With DIN Antenna Connector, Converts car specific antenna connector to a universal aftermarket connectorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Ad..

Car radio fascia adaptor panel to allow the fitting of an aftermarket Double Din car radio upgrade. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. This fascia is supplied with a fitting cage so no addi..

This camera interface cable allows you retain the original factory fitted camera when installing a new aftermarket head unit on select Hyundai and Kia cars with a factory fitted navigation system.This interface Includes a 12V to 6v Converter to provide a suitable power supply to a cars original ..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, mo..

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket versionFits Hyundai i10 1st Gen (PA) (2008-2012) car models, This fascia has side fixing brackets so no radio cage is needed. A removable pocket is included for single DIN in..

Connects2 Car Stereo Installation kit for installing a new after market single / double din headunit into your Hyundai. Kit includes Fascia Trim Panel, Steering Control Interface and Aerial Adaptor.Fitting Kit IncludesFascia Adaptor with Pocket Resistive Steering wheel Control Adaptor ..

Audio cable for Hyundai cars. Converts the factory harness to female ISO connectors for connecting an after-market European car radio. Use for cars with the standard audio system without Steering wheel control. Harness AdaptorsConnect the head unit to the original radio connector with..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionFits Hyundai iLoad, 1800, H1, Starex modelsThis fascia has side fixing brackets so no radio cage is neededCOLOUR: BLACKImportant Fascia NotesThe fascias are ma..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This cable converts the car radios existing aerial plug to an aftermarket DIN type used by most car radio manufacturers.An Aerial Adaptor .is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN version..

Speaker adapter cables;  used to connect after market speakers to the original loom on multiple Hyundai and Kia models built after 2014May not fit all versions of every vehicle. Some amplified and named sound systems such as BOSE, Infinity or Krell have different speakers with different con..