Hyundai

Car radio iso lead for Hyundai and Kia cars Connects the new radio to the cars original connector For Kia and Hyundai cars with 16 pin connectors at the back of the original radio.{ vehicle_compatibility }Harness AdaptorsConnect the head unit to the original radio connector without the n..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Hyundai ISO T-HarnessThe ISO-T Harness SOT lead (SOUND ON TOP) is the perfect accessory when installing an aftermarket amplifier. The ISO-T harness installed between the amplifier and vehicle, taking high-level input signal from the car and passing it through the amplifier and sending it to the ..

These adaptors will convert the non din-sized aperture left after removing the factory fitted stereo to a Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fasc..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..

Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in Hyundai (2016 Onwards) car models with Basic audio systemsPackage IncludesDouble Din Fascia (Gloss Black) Steering Control Interface Fakra to DIN An..

Complete replacement car audio fascia to enable you to change the original radio in the car to a Single DIN or Double DIN aftermarket version This fascia comes with side fixing brackets so no additional fitting cage is required. A removable pocket is supplied for Single DIN installations.Fits H..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Connects2 Car Stereo Installation kit for installing a new after market single / double din headunit into your Hyundai. Kit includes Fascia Trim Panel, Steering Control Interface and Aerial Adaptor.Fitting Kit IncludesFascia Adaptor with Pocket Resistive Steering wheel Control Adaptor ..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitting A..

These adaptors will convert the non din-sized aperture left after removing the factory fitted stereo to a Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fasc..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

Steering wheel control interface and adapter cable designed for select Hyundai vehicles with SPDIF digitally amplified audio system. (24 and 18 PIN connections)Allows you to retain the use of the audio steering control buttons when upgrading to an aftermarket head unit. This interface a..

Cars that have a 24 pin connector at the back of the head unit. There are 10 larger and 14 smaller pins in the connector.This connector has two sizes of pinsConnects the new radio to the cars original connector{ vehicle_compatibility }Harness AdaptorsConnect the head unit to the ..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..