Cadillac All Models

ISO to Din Antenna Aerial Adapter, converts car specific antenna connector to a universal aftermarket connector.Aerial AdapterAn Aerial Adapter is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adapters are available in both ISO and DIN ver..

ISO to ISO Amplifier Integration Interface4 channel adjustable ISO to ISO amplifier interface.Use to install a new radio in a car that has an original fit amplifier that takes a pre amplified audio feed.This interface converts the high level audio output of a new head unit to a low level..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Fascia adaptors will convert the non din-sized aperture left after removing the factory stereo to a single/double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fas..

Car audio metal cage kit and trim 103mm high. Needed with some double din fascias that do not fit the normal 113mm cages supplied with aftermarket head-units.This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation s..

GM Cars Single/Double DIN car audio fascia adapter panel to enable you to change the original radio in the car to a double din aftermarket version172mm x 98mmReplaces GM Delco oversize radio.This fascia kit has fixing brackets so no cage kit is needed.An additional pocket is included..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

Use this cable to retain an original fitment camera when fitting a new head unit.For General Motors (GM), Chevrolet, Cadillac, and GMC cars and trucks with original equipment navigation and reverse camera which use a 20 pin plug. Check vehicle before ordering for this plug, cars within these yea..

Female ISO to Male DIN antenna adapter cableThis cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by Clarion, JVC, Pioneer, Sony and other Japanese, Chinese and American radio manufacturers.Aerial AdapterAn Aerial Adapter is needed when replacing the origi..

Connects2 INFODAPTER allows vehicle information such as Climate Control, Parking Sensors and Heated seats to be displayed on any aftermarket AV head unit. This information would usually be displayed on the original head unit and therefore would not be retained without the use of an INFODAPTER. The i..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adapter for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into the car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the ..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into the car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the ..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into the car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the ..

Fakra to DIN Antenna Adapter. For Aftermarket Radio With DIN Antenna Connector, converts car specific antenna connector to a DIN antenna connector.Aerial AdapterAn Aerial Adapter is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adapte..

The CAM-GM51 allows you to keep your factory reverse camera function when upgrading a radio with PAC’s plug-n-play OE Reverse Camera Retention Harness.The harness plugs into the factory harness and provides the video from the back-up camera for aftermarket radio installations. Provides pl..