Land Rover All Models

Amplifier bypass cable for Range Rover sport and Discovery 3 cars with original Harman/Kardon LOGIC 7 premium sound system amplifiers under the driver's seat. Allows you to connect a new aftermarket radio directly to the car's speakers after bypassing the original amplifier. A new extra amp..

Alpine premium amplifier bypass cableAmplifier bypass cable for Freelander 2 cars with original Alpine premium sound system amplifiers in the rear right quarter. Allows you to connect a new aftermarket radio directly to the car's speakers after bypassing the original amplifier. A new extra ..

ISO T cable for Landrover Defender 2007-2016  This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit. Use when fitting handsfree car kits.This cable fits behind the car radio and is used as a break-out cable to enable the audio of the hands-..

BMW, Land Rover, Mini Quadlock to ISO T cable for cars 2005 onwards without Ignition supply in the radio connector. This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit.This cable fits behind the car radio and is used as a break-out cable to enable the ..

The CT51-LR11 is an amplifier bypass wiring harness for use on a variety of Land Rover models. This lead allows you to connect a new aftermarket radio directly to the car's speakers after bypassing the original amplifier. This harness also allows for the retention of the original subwoofer. For ..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.SPECIAL ORDER ITEM ..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Special adapter lead for the fitting of a Mercedes Audio 20 head unit into a vehicle with an original Audio 5 head unit.Mercedes Audio 20 quadlock to Audio 5 ISO adapter harness.Allows the fitting of an Audio 20 head unit into a vehicle that was originally fitted with an Audio 5 head unit. ..

Steering wheel control interface for Range Rover Sport cars 2005-2009 that will also allow the original head unit to remain connected and relocated so the original display (navigation) above the radio will continue to work.This interface will retain the use of the steering wheel audio controls. ..

Special interface for Freelander 2 with standard audio system Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. CAN interface included with 12v ignition, and parking buzzer retention.Includes parking buzzers to maintain PDCNOT SUITABLE F..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Provides power and speaker connections from the car.Suitable for Landrover Discovery II, Freelander I and Rover 75 car models (With BMW round pin wiring){ vehicle_compatibilit..

Fakra antenna cable adapter  for cars with non-amplified antenna's and single fakra style connectors. Suits BMW, Jaguar, Chrysler, Chevrolet, MercedesThis  converts the cars existing Fakra aerial plug to an aftermarket DIN type used by most car radio manufacturers. it is for cars..

Connects2 INFODAPTER allows vehicle information such as Climate Control, Parking Sensors and Heated seats to be displayed on any aftermarket AV head unit. This information would usually be displayed on the original head unit and therefore would not be retained without the use of an INFODAPTER. The i..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the hand..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..

A/V Input / Output for Range Rover & Rover 75 with i-BusAVROV Features:A/V Input A/V Output Camera InputAVROV - Audio Video Input Output Adaptor Compatible with:RangNav TV AVROV - Range Rover Audio Video Input Output Adaptore Rover Rover 75 With i-Bus ..

Package IncludesPioneer Class D 4 Channel Multi Channel Car Amplifier 400W InCarTec ISO Mute SOT Cable{ vehicle_compatibility }Compact 4 Channel Power.An amplifier shouldn’t take up too much space, especially in your car. That is why this Class-D amp might just be w..