Porsche

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Car Audio Stereo Installation kit for installing a new after market double din headunit into your Porsche. This is complete kit including Fascia Trim Panel, Steering Control Interface for Volume Controls on Steering Wheel, and Aerial Adaptor.Package IncludesDouble Din Fascia Fitting Kit (..

MOST fibre optic interface designed to retain the use of the original fibre optic amplifier in Porsche Boxster or 911 to allow the fitting of an aftermarket radio upgrade.The interface connects at the back of the radio, it takes the phono audio output from the new radio and converts it to a digi..

Complete stereo upgrade kit to install a single or double DIN aftermarket radio in a Porsche Boxster, Cayman or 911 cars with Bose amplified audio systems.Package IncludesSilver flush mount fascia fitting kit Antenna adapter cable Car radio replacement adapter cable CANBus ignition ..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single / Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Importan..

MOST Fibre optic interface to allow the fitting of a new head unit into a  Mercedes ML, GL & R series and retain the use of the fibre optic amplifier. You will lose front to rear fading ability. Also works on some Porsche carsOn Porsche Only for vehicles with the CDR23 CDR24  PCM..

Complete stereo upgrade kit to install a single or double DIN aftermarket radio in a Porsche Boxster, Cayman or 911 cars with PCM3 radios and Bose amplified audio systems and to retain the use of the original steering wheel audio controls.Package IncludesMatt black flush mount fascia fitt..

This stereo upgrade fitting kit for Porsche Boxster, Cayman, or 911 (987 / 997) with CDR24 / PCM2.1 BOSE or amplified audio lets you replace the factory radio with a Single or Double DIN aftermarket head unit while keeping BOSE fibre-optic amp and steering wheel controls intact. The kit includes a s..

Radio Replacement Kit, allows the fitment of a Double DIN aftermarket headunit to the selected vehicle. This kit includes Fascia, Fibre Optic Amplifier Retention Interface and Aerial Adaptor.Package Includes:Double Din Fascia Fibre Optic Amplifier Retention Interface Fakra to DIN Aeri..

Complete stereo upgrade kit to install a single or double DIN aftermarket radio in a Porsche Boxster, Cayman or 911 cars without Bose audio, and retain the use of the original steering wheel audio controls.Package Includes:Silver Flush Mount Fascia Fitting Kit Steering Wheel Control Int..

A pair of front or rear door car speaker adapter panels for 165mm (6.5 inch) speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165mm (6.5" or 6.75" break off inner tabs for 6.75&..

Radio Replacement Kit, allows the fitment of a Double DIN aftermarket headunit to the selected vehicle. This kit includes Fascia and Aerial Adaptor.Package Includes:Double Din Fascia (Black) Fakra to DIN Aerial Antenna Adaptor ISO to Din Antenna Aerial AdaptorPorsche 911 (996)..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..

Complete stereo upgrade kit to install a single or double DIN aftermarket radio in a Porsche Boxster, Cayman or 911 cars without Bose audio.Package Includes:Single / Double Din Silver Flush Mount Fascia Fitting Kit Antenna Adaptor Cable Car Radio Replacement Adaptor Cable CAN BUS Ig..

Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in select Porsche 911, Boxster and Cayman (2012-2016) car models with CDR31 systems without Bose audio.Package IncludesDouble Din Fascia Kit (Matt Black) ..

Package IncludesPioneer SPH-DA77DAB 6.8" WVGA Capacitive Multi-touch Panel Screen Weblink 3.0 Android Auto/ Apple CarPlay DAB Car Stereo DAB Aerial Double Din Fascia Fitting Kit (Silver / Grey) Steering Control Stalk Adaptor Aerial Adaptors Stereo Patch Lead{ vehicle_comp..

Package IncludesSTINGER IE268E 6.8" Screen Wireless Apple Carplay / Android Auto, Bluetooth, DAB+ Stereo DAB Aerial Single / Double Din Silver Flush Mount Fascia Fitting Kit Antenna Adaptor Cable Car Radio Replacement Adaptor Cable CAN BUS Ignition Interface{ vehicle..

Car audio metal cage kit and trim 103mm high. Needed with some double din fascias that do not fit the normal 113mm cages supplied with aftermarket head-units.This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation s..