InCarTec

Speaker adapter cables;  used to connect after market speakers to the original loom on most Mercedes models built after 2014May not fit all speakers on all versions of every vehicle. Some vehicles have subwoofers or tweeters with different connections. May not fit cars with premium amplifie..

Speaker and Ring Fitting Nuts, Bolts and Terminals SetPack of nuts, bolts, washers and terminals for fitting a pair of speakers and speaker rings.Contains The Following12x M5 bolts 12x M5 flanged nuts 8x M5 Stainless Steel Washers 4x 2.8mm Insulated Spade Terminals 4x 4.8mm In..

SOT adapter cable for 2017 onward Citroen and Peugeot cars to allow the fitting of an aftermarket handsfree bluetooth phone kit.This SOT adapter cable is designed to allow the fitting of an aftermarket handsfree bluetooth phone kit, such as a Parrot or Bury kit.The adapter lead connects betw..

CANbus steering wheel control interface for Fiat/ Alfa Romeo, Citroen, Lancia, Peugeot, Vauxhall vehicles with the larger-style connector behind the radio.This interface uses a larger style connection behind the original radio to allow the use of the original steering wheel control buttons with ..

This cable allows you to connect an aftermarket car radio with European iso connectors to the cars wiring using the original connectors in the car.Not suitable for cars with Rockford amplified speakersHarness AdaptorsConnect the head unit to the original radio connector without t..

Use this cable to retain an original fitment camera when fitting a new head unit.For Fiat, Alfa Romeo, Lancia, Chrysler, Dodge, Jeep, RAM and SRT vehicles built after 2014 with original reverse camera. Only for vehicles with the larger FCA 52 pin connector for the radio, not for vehicles with IS..

Silicone Speaker Baffle Weather‑Proofing Ring Kit for 165 mm / 6.5″ SpeakersThese foldable silicone speaker baffle kits are designed to improve the directional flow of sound waves and focus them into the cabin, while offering waterproof protection for 165 mm (6.5″) speakers. The soft..

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector.The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is..

This USB retention cable allows the installation of an aftermarket head unit while maintaining the factory USB and AUX connections.,it supports charging and basic media playback. USB-supported Android Auto or Apple CarPlay may be limited or unavailable. Easy plug-and-play installation preserves ..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.Steering wheel control interface and adapter cable Citroen C1, Peugeot 108 an..

GM Cars Single/Double DIN car audio fascia adapter panel to enable you to change the original radio in the car to a double din aftermarket version172mm x 98mmReplaces GM Delco oversize radio.This fascia kit has fixing brackets so no cage kit is needed.An additional pocket is included..

Universal USB Dashboard Socket to USB Male 2M Extension Lead.Extend the USB input from the rear of a new aftermarket head unit to the dashboard USB socket or allows you to convert your cigar lighter socket into a USB port.The dashboard socket is the size of most cigarette lighter sockets for..

Double DIN car radio fascia for Citroen Berlingo, Peugeot Partner and Rifter, Toyota ProAce City and Vauxhall/Opel Combo E (2018 onwards) vehicle models.Only suitable for aftermarket radios with  "L shaped Single DIN chassis" with a chassis at the lower end (e.g. Alpine ILX705D) o..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cut-out: 147 mm Ring outside: 172.5 mm Ring he..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionFits Hyundai iLoad, 1800, H1, Starex modelsThis fascia has side fixing brackets so no radio cage is neededCOLOUR: BLACKImportant Fascia NotesThe fascias are ma..

This is for power supply and speakers only. The cable is  to connect Daihatsu, Perodua, Scion, Subaru, Toyota cars  to an after-market European car radio with ISO style connectors.For all Toyota cars with standard audio systems (without amplifiers)For cars with steering..

Complete fitting kit to install a Double DIN head unit and retain the original steering wheel controls in Isuzu D Max and Isuzu MU-X & Holden Colorado vehicle model.Package IncludesDouble Din Fascia (Matt Black) Steering Wheel Control Interface Antenna Adaptor Universal patch le..

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in Renault Trafic, Vauxhall Vivaro and Nissan Primastar (2011-2014) vehicle models with Type D radios.Package IncludesDouble Din Fascia Adaptor (Matt Black) Stee..

Upgrade your Ford Transit Custom with this complete fitting kit designed for seamless installation of a Double DIN aftermarket car stereo head unit. This kit is specifically engineered for the Limited and Sport model variants (2016-2018), featuring the display above the radio, DAB, and front passeng..

4 channel RCA Ground Loop Isolator (With level adjustment)Low level To Low Level Ground loop isolator.Prevents interference when connecting amplifiers to the pre-outs of radios .Has level adjustments to match the output of the interface to the input of the amplifier ...