Lexus IS

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Lexus Antenna Adaptor. For Aftermarket Radio With DIN Antenna ConnectorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, conve..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This rear view camera fits in place of the original rear number plate light, the camera has built in LEDs to replace the original bulb.FeaturesNTSC RCA video Wide 170° viewing angle Super CMOS sensor for high quality night video Dust and waterproof IP67 protection rating Par..

Replacement car audio facia to enable you to change the original radio in the car to a single DIN aftermarket versionFits Lexus IS (2005-2013) including both saloon/sedan and hard top coupe convertible body stylesDesigned to be used with the single DIN cage originally supplied with the after..

This cable allows you to add an aftermarket back-up NTSC camera to various Lexus cars (2012 Onwards) with GEN7/GEN8/GEN9 Media-Navigation Systems.Only suitable for 59 pin and 16 pin connectionES series cars of 2012-2018 MY are not supported!..

Add Camera to OEM Lexus 28 Pin ConnectorThis 28 pin camera adapter cable allows you to add an aftermarket rear view camera to OEM monitors on Toyota Land Cruiser and Lexus IS models with MFD GEN5 multi-displays.Power of the additionally installed rear view camera should be taken from the A..

Retains steering wheel controls and OEM amplifier when replacing the radio For cars with JBL premium sound systemsThe loose blue wire is to be connected to the amp turn on wireWhat's Included23-224-SWC Steering Control Adaptor Stereo Patch LeadWorks with the following..

Amplifier bypass cable for Lexus IS 200,GS430,, LS430, RX300.  Allows you to connect a new aftermarket radio directly to the cars speakers after bypassing the original amplifier which is behind the passenger glovebox.Fots cars with Lexus Amplifier On RX300 the amplifier is behind the rear..

For Lexus IS 220. 250, 300, 350 & RX 300 cars. Also for Toyota Landcruiser (08>) with P8506 touch screen sat nav.This cable fits  in the rear of the vehicle at the near side boot amplifier. It enables the hands-free kit to bypass the OEM amplifier and play the sound direct to the car..