InCarTec

Adaptor lead to pair an InCarTec 49- series steering wheel control interface to the steering wheel remote input of a Chinese, Xtrons, Eonon, Pumpkin or unbranded aftermarket radio. These types of radios have loose wires for connecting to the steering wheel controls.This short adapter lead connec..

24 Way connector and voltage adapter to keep the use of the original fitted reverse camera with an aftermarket head unit.NOT SUITABLE FOR BIRDS EYE 360 camera system Connect the purple wire to the new head-units 12V reverse signal wire, black to ground. The interface drops the volta..

Provide a sound upgrade to your VW, Skoda and Seat front doors with our 165mm (6.5 inch) speaker upgrade fitting kit.This kit fits various VW, Skoda and Seat car models . Please see our compatibility list for more cars that can benefit from this upgrade kit.This fitting kit allows the fitt..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. 17..

Some fascias for Ford cars have a space to relocate a new passenger air bag light, if the vehicle does not have this as an original feature this card holder insert can be used to blank out the hole in the fascia instead of fitting a more expensive air bag light insert.Failure to refit the airbag..

Complete fitting kit to change the original radio in a 2014 onward Ford Transit Connect with an original display above the radio for a single/double din after market unit.This kit comes with the passenger Airbag button already installed in the fascia.An additional OEM lock and hazard switc..

Complete fitting kit to change the original radio in a Range Rover Sport or Discovery 3 with original Harman/Kardon LOGIC 7 amplified audio system for a double din aftermarket unit and also retain the use of the original nav/vehicle info display screen.THIS IS NOT A DIY PRODUCT AND NEEDS PROFE..

Provide a full sound upgrade to your Toyota, Citroen C1, Peugeot 108, Scion or Subaru front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. Please see our compatibility list for more cars that can benefit from this upgrade kit.  This speaker upgrade kit offers a si..

This retention reverse camera adapter designed for selected Suzuki and Izuzu cars. This interface retains the factory/ OEM fitted reverse view camera when replacing the original stereo with a new upgraded aftermarket head unit.This interface is compatible with all touch screen models from 2012 o..

Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio in various Volkswagen cars with new (2015 onwards) style quadlock connection. This is to replace original Composition or Discover radios.This is for a new style (2015 onwards) Quadlock connector used on sele..

DAB & AM/FM & GPS CombiflexReplacement Roof mount  beesting combiflex antenna to change an existing GPS antenna to include DAB/ AM/FM & GPS This antenna is needs a separate switched 12v feed. Active DAB, GPS and FM. 10db gain for DAB. 75 degree angle. 230mm rod length. Inclu..

Adaptor cable to convert Stallantis vehicles with the 2016 onwards NAC radios to a standard ISO connector for fitting an aftermarket head unit.The harness has a built in CANbus interface that provides a key present ignition power supply to the radio, and and illumination output on most cars. Ins..

Steering wheel control interface and adapter cable for Nissan Navara D40, NV200, Pathfinder, Patrol and Qashqai cars to fit an aftermarket radio upgrade.The cable adapts from the 20 pin Nissan connector (the connector has a larger size terminal at either end of the connector) in the car to stand..

Universal patch lead to be used with InCarTec 29- series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.This cable plugs into the ICT control box and connects to the 3.5mm socket or single wire ..

Complete fitting kit to change the original radio in a 2013 to 2017 Ford Transit Custom Euro 5 van with original display above the radio for a double din after market unit.Package IncludesDouble Din Fascia With Brackets (Gloss Grey) Steering Wheel Control Interface Ford Passenger Airb..

Replacement car audio fascia to enable you to change the original radio in the car to a double DIN aftermarket versionThis unit is side fix so no cage is needed.This part is NOT compatible with new style Passat (2000-2005)Dimensions Of Face PlateMaximum External Dimensions..

Provide a full sound upgrade to your Abarth, Citroen, Fiat or Vauxhall front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various Abarth, Citroen, Ford, Fiat, Holden, Iveco, Peugeot and Vauxhall vehicle models. Please see our compatibility list for more..

FLUSH FIT Car radio fascia adaptor panel to allow the fitting of an aftermarket single or double din car radio upgrade.The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.Use the supplied pocket with t..

CANbus steering wheel control and parking sensor retention interface for cars with quadlock connectors behind the radio.This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also pro..