InCarTec

Complete fitting kit to install a Single/ Double DIN head unit and retain the original steering wheel controls in Lexus RX (2003-2009) vehicles with factory fitted Mark Levinson Navigation systems. This fitting kit will also retain use of the top screen for both navigation and air con visualisation ..

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in a Vauxhall Vivaro, Renault Trafic, Nissan NV300 (2014 Onwards) or 2016 onwards Fiat Talento vehicle models WITH ORIGINAL OEM NAVIGATION SYSTEMS.ONLY SUITABLE FOR MOD..

Complete stereo upgrade fitting kit to install a double DIN aftermarket radio and retain the use of the steering wheel controls in a Vauxhall Corsa D. The steering control interface will also generate a true key present ignition supply to the new radio.Package IncludesDouble Din Fascia (..

CANBUS steering wheel control interface for Mercedes with original Mercedes Comand APS NTG2.5 head units.This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus ou..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 147.5 mm Ring outside: 165.5 mm Ring h..

Adaptor lead to pair an InCarTec 29-6XX or 29-7XX series stalk control interface to the steering wheel remote input of a Pioneer aftermarket radio upgrade.This short adapter lead connects the 29- series InCarTec interface box to the steering wheel remote input on the back of a Pioneer radio. The..

Add Camera to OEM Toyota Land Cruiser 28 Pin ConnectorThis 28 pin camera adapter cable allows you to add an aftermarket rear view camera to OEM monitors on Toyota Land Cruiser and Lexus IS models with MFD GEN5 multi-displays.Power of the additionally installed rear view camera should be ta..

Adaptor cable to convert Seat Ibiza, Toledo with quadlock connectors to a standard ISO connector for fitting an aftermarket head unit. The harness has a built in CANbus interface that provides a key present ignition power supply to the radio, ISO adapter harness for Seat Ibiza, Toledo vehi..

Steering control retention interface for Nissan Navara (2016 - 2019), Steering control and 360 degree camera retention interface for Nissan Navara 2016-2019. Provides connections from the original Nissan connectors to aftermarket ISO connectors.Retains Steering wheel controls  ..

Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Suzuki SX4 S-Cross (2013-2022) car models.Package IncludesDouble DIN Car Audio Facia Adaptor Panel (Matt Black) Steering Control Interface With Phone Button..

ISO adapter harness for Abarth, Alfa Romeo, Citroen, Fiat, Peugeot and Vauxhall cars with the new style connector. Use to install an after market head unit.New style connector to standard ISO connectors.Harness AdaptorsConnect the head unit to the original radio connector without the nee..

Car Audio Steering wheel control interface allowing use of the original buttons with a new aftermarket head-unit.Suitable for Saab 9-3/ 9-5 cars with GM LAN bus connectors behind the radio.This interface provides ignition, illumination, speed pulse, reverse gear signal for 9-3 models and Ign..

Chevrolet, Nissan, Renault, Vauxhall radio replacement adapter cable, allows the fitting of an aftermarket car stereo upgrade by adapting the original 20 pin Nissan connector to standard aftermarket ISO connectors.This cable includes the power and speaker supply. If the car has steering wheel co..

Parking sensor buzzer retention interface. For cars that lose the parking sensor tones when the original radio is removed.The original parking tones and warning chimes in many cars are produced by the original radio and when an aftermarket radio is fitted these tones are lost. This CANbus interf..

Steering wheel control interface for 2014> model Vauxhall Vivaro, Renault Trafic, Nissan NV300 and 2016> Fiat Talento vans with standard original radios. Also fits Movano and Renault Master van and Master Truck Red Edition 2020.This interface also adapts from the white connector in the veh..

RECOIL SL1789 550W Max / 250W RMS Powered Under-seat Active Slim 8”x9” Subwoofer with Two Passive Radiators and Complete Wiring KitThe SL1789 compact 8-inch (200mm) amplified subwoofer from RECOIL is an all in one system, allowing you to add deep, accurate bass to your vehicles origi..

CANbus steering wheel control interface for Abarth, Alfa Romeo, Chrysler, Citroen, Fiat, Ford, Iveco, Lancia, Peugeot & Vauxhall vehicles with older style ISO connections.This interface uses ISO connectors behind the radio to retain the use of the steering wheel controls and provide CANbus o..

Complete fitting kit to install a double DIN head unit and retain the original steering wheel controls in Ford cars with the original Black oval-shaped radio and CANbus service.This kit includes CAN igntion and illuminations outputs on the steering wheel control interface.Package Includes ..

ISO adapter harness for fitting a new stereo in an Audi A4, A4 Cabriolet, A6 or A8 with an original RND-D (Navigation Plus) radio with BOSE amplified audio system.Also suitable for Audi TT built before November 2001 with BOSE amplified audio system.This harness adapts from the original ISO a..

High quality quick fix DAB antenna is for cars with DIN original antenna connectors, it can be used on other cars with the addition of an antenna adapter.This interface amplifies the existing FM signal and extracts from it a DAB signal, splitting the existing FM antenna into both FM and DAB...