Complete stereo upgrade fitting kit to install a Double DIN aftermarket car stereo head unit and retain the use of the factory steering wheel controls in select Nissan Note (2007-2013) car models.

Package Includes

• Double Din Fascia Adaptor (Matt Black)
• Steering Wheel Control Interface
• Rectangle to Din Car Aerial Antenna Adapter Cable
• Universal Patch Lead (Included)

Fascia Adaptor

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version When fitting a new head unit using the cars original mounting brackets, a small gap is sometimes left around the unit. This trim fills out the gap for a neater finish.

Suitable for various Nissan vehicle models, can also be used on other vehicles as a "universal" trim.

Steering Control Adaptor

The cable adapts from the 20 pin Nissan connector (the connector has a larger size terminal at either end of the connector) in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.

This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip, source and phone buttons. (6 function steering wheels)

This interface fits cars with the newer 20 way connector behind the radio which has two larger terminals on either side for power and earth. These radios will also have an additional smaller connector, this is used for CD changer and navigation audio. It is not used when changing the head unit.

Rectangle to Din Car Aerial Antenna Adapter Cable

Nissan (grey rectangle female antenna to male DIN connection) car aerial antenna adapter cable. This cable adapts from the grey plastic rectangle Nissan antenna connector in the car to a standard aftermarket male DIN connector, used when fitting a new aftermarket stereo.

Connection Options

Option 1

This requires connecting the loose blue wire (male bullet connector) on the antenna adapter to the antenna turn-on wire (Female bullet connection) on our 29- Series steering wheel control interface.

1. Connect the vehicle specific connector to the original AM/ FM antenna connection in the car.
2. Connect the DIN aerial connection to the back of the after market radio.
3. Connect the bullet connector (on the blue wire) to the blue antenna turn on wire on the 29-Series interface.

Option 2

This requires connecting the loose blue wire (male bullet connector) on the antenna adapter to the antenna turn-on wire (Female bullet connection) on the new aftermarket radio harness.

1. Connect the vehicle specific connector to the original AM/ FM antenna connection in the car.
2. Connect the DIN aerial connection to the back of the after market radio.
3. Connect the bullet connector (on the blue wire) to the blue antenna turn on wire, or the blue/white remote turn on wire coming from the new aftermarket radio harness.

Universal patch lead

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.

Important Patch lead: 

For Unbrabed / Chinese Head Units you will require a dedicated 49-000 Patch Lead

Important Fascia: 

• The fascias are made to suit industry standard sized stereos such as Alpine, JVC, Kenwood, Pioneer, Sony etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare cases "modification"  may be  necessary or needed.
Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the shape & connection in the picture listed is the same as you have in your vehicle. If in doubt please Contact US with your vehicle details and we will confirm what you require.