InCarTec

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

Provide a full sound upgrade to your front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various GM vehicles including Chevrolet, Holden, Vauxhall and Saab 9-4X  . Please see our compatibility list for more cars that can benefit from this upgrade ki..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. This..

Speaker adapter cables used to connect after market tweeters to the original loom on Mini, MG, Rover and Skoda{ vehicle_compatibility }Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of car is listed in ..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.Thi..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.This interface will retain the use of the standard steering wheel audio controls (volume, seek, source and mute) with an aftermarket head unit.This interface provides control..

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 144.5 mm ring outside : 163.5 mm Ring Height: ..

Replacement car audio fascia to enable you to change the original radio in the car to a double DIN aftermarket versionFits Toyota Auris car modelsThis kit uses a 103mm tall cage for double DIN fitting rather than the one that comes with most after market head units. We sell the correct cage ..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

FLUSH FIT car radio fascia panel adapter with fitting cage to allow the fitting of an aftermarket Double DIN stereo upgrade in various Vauxhall cars.This fascia kit gives a professional flush mount finish to the installation.172mm x 98mmThis fascia adapter panel is to fit a double din af..

Interface to retain the audio steering wheel controls (including phone button) in a Volkswagen car and also retain parking sensor and climate control display which is normally displayed on the CDR510 radio. The PDC and climate info is shown on the cars central display between the clocks, DOES NOT PU..

Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in 2014 onwards Ford Transit Connect vehicles (WITHOUT AN ORIGINAL TOP DISPLAY)Package IncludesDouble Din Fascia With Brackets Black Steering Control Inte..

Citroen C-Crosser (with SAT NAV) car to female ISO connectors for connecting a European car radio. This cable includes the power and speaker supply.Harness AdaptorsConnect the head unit to the original radio connector without the need to cut any of the existing wiring.TECHNICAL NOTE ..

Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio and retain the use of the steering wheel controls in various Skoda Yeti (2009-2014) car models.This kit is suitable for select Skoda Yeti car models with a single Fakra antenna connection on the back of the original ra..

Antenna adapter cable for cars with ISO connectors that have amplified original antennas.This cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by most car radio manufacturers. It also provides a power feed to give 12v from the car radio to the cars amplified ante..

This cable adaptor style antenna connection at the back of the cars original radio to a standard aftermarket male DIN antenna connection to allow the fitting of an aftermarket radio upgrade. The connector is rectangular with a round antenna terminal inside.The loose blue wire needs to be connec..

ISO T cable for Hyundai cars . 14 way connector behind radio This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit. Use when fitting handsfree car kits.This cable fits behind the car radio and is used as a break-out cable to enable the audio of ..

Toyota Landcruser 120 and LC5 Amplifier bypass cable  to ISO. For Toyota Landcruisers with Sat Nav)This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit. Use when fitting handsfree car kits.Fits undeneath the drivers seat  on vehicles with ..

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.Retains Audio and phone controls, speed pulse and reverse output signal.Includes retention for original aux port.What's Included29-748 Steering Control Adaptor Stereo Patch L..

CANbus steering wheel control interface for Abarth, Alfa Romeo, Chrysler, Citroen, Fiat, Ford, Iveco, Lancia, Peugeot & Vauxhall vehicles with older style ISO connections.This interface uses ISO connectors behind the radio to retain the use of the steering wheel controls and provide CANbus o..