InCarTec

Nissan T to ISO cable for cars made in Europe. This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit. Use when fitting handsfree car kits.This cable fits behind the car radio and is used as a break-out cable to enable the audio of the hands-free kit to p..

CANBUS steering wheel control interface for Volkswagen with original Comand APS NTG2.5 head units.This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs a..

Handsfree ISO T hraness for VW cars made after 2010 with newer style Quadlock connector also fit for Seat & Skoda Cars.Flying ignition for connection 12v IgnitionThis cable fits behind the radio and routes the phone audio through the front speakers.If the original radio connector &nb..

Complete fitting kit to install a single or double DIN head unit in an Audi A3 8P with fully amplified speakers.{ vehicle_compatibility }Package IncludesSingle/ Double DIN Fascia With Removable Pocket (Matt Black) Audi ISO BOSE Radio Adaptor Harness With CANBus Ignition Antenna ad..

Provide a full sound upgrade to your Toyota, Citroen C1, Peugeot 108, Scion or Subaru front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. Please see our compatibility list for more cars that can benefit from this upgrade kit.  This speaker upgrade kit offers a si..

USB Port Retention CableCable to retain the use of the original USB port when replacing the original head unit..

New style connector ISO T cable for Land Rover Cars.This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit. Use when fitting handsfree car kits.This cable fits behind the car radio and is used as a break-out cable to enable the audio of the hands-free..

Antenna adapter cable for cars with ISO connectors that have amplified original antennas.This cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by most car radio manufacturers. It also provides a power feed to give 12v from the car radio to the cars amplified ante..

Speaker adapter cables; used to connect after market speakers to the original loom on various Nissan models.Fits vehicles aimed towards the US and Japanese markets until approximately 2005 - please see full description for compatibility.Please make sure that is the correct Speaker Harness ..

Replacement car audio fascia to enable you to change the original radio in the car to a single DIN aftermarket versionCar radio fascia adaptor panel to allow the fitting of an aftermarket single DIN car radio upgrade.The fascia adaptor allows the fitting of an aftermarket radio into the dash..

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 144.5 mm ring outside : 163.5 mm Ring Height: ..

Complete stereo upgrade fitting kit to install a Single DIN aftermarket car stereo head unit in Citroen C1, Peugeot 108 and Toyota Aygo car models (Without Steering Controls)Package IncludesSingle Din Fascia (Anthracite) Aerial Antenna Adaptor Car Radio ISO Connection HarnessFas..

Female ISO to Male DIN antenna adapter cableThis cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by Clarion, JVC, Pioneer, Sony and other Japanese, Chinese and American radio manufacturers.Aerial AdaptorAn Aerial Adaptor is needed when replacing the origi..

Car radio fascia adapter panel to allow the fitting of an aftermarket Single or Double DIN car stereo upgrade. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.The fascia is a flush mount fascia, giving..

Adaptor cable to connect various General Motors cars and trucks to standard ISO connectors to enable the fitting of an aftermarket head unit.This adapter harness is designed to adapt from the original 48 Pin connector in the dashboard of various MG (2009 onwards) vehicles to standard aftermarket..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. 173m..

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Chrysler, Dodge and Jeep vehicles from 2008 onwards.Package IncludesDouble Din Fascia Adaptor With Side Brackets Steering Control and Amplifier Turn On Interface ..

ISO T cable for Daewoo cars. Lanos, Nubira, Leganza, Matiz, Tacuma , Kalos. Ssangyong, Musso,  Rexton,  Actyon,  Kyron This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit. Use when fitting handsfree car kits.This cable fits behi..

Complete stereo upgrade kit to install a double DIN aftermarket radio in a Dacia Duster (2017 onwards).{ vehicle_compatibility }Package IncludesDouble Din Fascia (Matt Black) Steering Wheel Control Interface Fakra Male to SMB Female DAB Adaptor Fakra to DIN Aerial Adaptor Cable ..

Replacement car audio fascia to enable you to change the original radio in the car to a single DIN aftermarket versionCOLOUR: MATT BLACKCar Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modifica..