InCarTec

A Pair of 200mm (8") speaker spacer rings for 200mm speakersSpeaker size: 200mm (8 inch) Mounting hole diameter:182mm Outer Diameter: 202mm Thickness 22mmPlease make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model an..

CAN BUS steering wheel control and parking sensor retention interface for Toyota cars with quadlock connectors behind the radio.This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It ..

Reverse view high level brake light camera and video monitor kit specially designed for Renault Trafic, Vauxhall Vivaro and Nissan Primastar (2001-2013) vehicle models.The camera included in this kit replaces the high level brake light at the rear of the vehicle and provides additional visual sa..

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. Suit..

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. &nb..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 148 mm Ring outside: 166 mm Ring heigh..

This CANBUS steering wheel control interface will allow you to retain the use of the steering wheel audio controls.Gives volume, seek, source, and telephone commands to an after market radio.The quadlock adapter has 4x phono pre-out connectors to integrate with the original amplifier in the ..

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. BMW 17 pin round pin steering wheel control interface.Some cars may have the Wave Casette head unit and the harman/kardon amplified audio system. If the cars has this set up and a quadlock con..

Speaker adapter cable used to connect aftermarket speakers to the original connectors in the cars, These 2 way connectors fit many models of Japanese cars.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of c..

Complete cage kit and replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThe kit is designed to replace the metal cage which is normally supplied with the new head-unit.   COLOUR: MATT BLACKModification to the..

Reverse view high level brake light camera and video monitor kit specially designed for Mercedes Sprinter and VW Crafter (2006-2016) vehicle models.    The camera included in this kit replaces the high level brake light at the rear of the vehicle and provides additional visual safety t..

Car radio fascia adaptor panel to allow the fitting of an aftermarket single din car radio upgrade.The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.A Single Din radio fits into the fascia using the ..

Replacement car audio fascia to enable you to change the original radio in the car to a Single or Double DIN aftermarket versionThis fascia kit uses side fixing brackets so no radio cage is neededIncludes a removable pocket for Single/ Double DIN installationFits Mazda CX-7 (2007-2012) c..

Replacement car audio fascia to enable you to change the original radio in the car to a single DIN aftermarket version Fits Renault Megane and Renault Fluence car models. Designed to be used with the single DIN cage originally supplied with the aftermarket radio.COLOUR: MATT BLACKCar Aud..

Car radio adapter cable for converting BMW style 17 pin connector  to  ISO connectors suitable for European after-market car radio's connectors.Suits older BMW, Mini cars and some Land Rover &  Rover models.for BMW 5 series E39 check the radio connector first as it c..

Provide a sound upgrade to your Ford B-Max (2012-2018) front or rear doors with our 165mm (6.5 inch) BLAM RELAX 165RC coaxial speaker upgrade fitting kit.This speaker fitting kit contains a set of BLAM RELAX 165RC 165mm (6.5 inch) Hi-efficiency 2ohm Coaxial speakers.For a speaker and tweet..

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in select Mercedes Sprinter (2019 - 2023) vehicle models with original open dash or single DIN standard radios.Package IncludesDouble Din Fascia Adaptor (Matt Blac..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.PLEASE NOTE: A loose wire connection is requiredWhat's Include..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.This interface will retain the use of the standard steering wheel audio controls (volume, seek, source and mute) with an aftermarket head unit.This interface provides control..

A pair of ISO standard speaker adapter cables for VW Group (Cupra, MAN, Seat, Skoda, Volkswagen) vehicles Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checkin..