InCarTec 20-188-IGN Peugeot ISO Cable With CANBUS Ignition Adaptor
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 5
- Brand: InCarTec
- Model: 20-188-IGN
- EAN: 7427282748254
- Warranty: 2 Year Warranty
Description
Product Compatibility Chart
| Make | Model | Years | Notes |
| Peugeot | 2008 | 2019 onward | (2nd GEN) |
| Peugeot | 3008 | 2016 onward | (2nd GEN) |
| Peugeot | 408 | 2014 - 2018 | 2nd Gen |
| Peugeot | 508 | 2010 - 2018 | (1st Gen) |
| Peugeot | Expert | 2016 onward | Mk III (Traveller) |
| Peugeot | Partner | 2018 onward | III |
| Peugeot | Rifter | 2018 onward |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Adaptor cable to convert Stallantis vehicles with the 2016 onwards NAC radios to a standard ISO connector for fitting an aftermarket head unit.
The harness has a built in CANbus interface that provides a key present ignition power supply to the radio, and and illumination output on most cars. Installation is plug and play.
Fits various Peugeot, Citroen, Fiat, Toyota, Vauxhall and Opel vehicles.
This lead has a built in CANbus interface which provides a key present ignition power supply. A key present ignition supply will generate an ignition feed to turn the head unit on with the first position of the key, the interface will continue to give an ignition feed to the radio when the key is turned back to the off position, the ignition feed stops only when the key is then removed from the ignition barrel. On most vehicles the illumination signal to dim the display when the light are on will also be available.
*Illumination output not available on Peugeot 5008
Harness Adaptors
Connect the head unit to the original radio connector without the need to cut any of the existing wiring.
TECHNICAL NOTE
- CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS.
- SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.
If in doubt please email us with your vehicle details and we will confirm what you require.
Please make sure that is the correct Wiring Harness for your car by firstly checking to see if your make, model and year of car is listed in the description. Secondly by checking to see if the Shape in the picture listed is the same as you have in your vehicle. We try to provide upto date information as possible. If you are unsure please contact our Customer Service and we will be happy to help you.
