InCarTec

Radio replacement adapter cable for Peugeot and Citroen cars 2017 onward. Use to connect an aftermarket stereo upgrade.Radio replacement adapter cable for various Peugeot and Citroen cars from 2017 onward.Adapts from the large connector in the car to standard aftermarket ISO connectors to al..

A pair of rear side shelf car speaker adapter panels for 130mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical InformationSpeaker: 130 mm Panel cut out: 113 mm Outer diameter: 129.3 mm x 128.50 mm ..

Complete stereo upgrade kit to install a Single DIN aftermarket radio and retain the use of the steering wheel controls in select Vauxhall vehicles.Package IncludesSingle Din Fascia (GLOSS BLACK/PIANO BLACK) Steering Wheel Adaptor Interface Fakra to DIN Aerial Adaptor, 12v Phantom Pow..

Reverse view high level brake light camera and video monitor kit specially designed for Peugeot Expert, Citroen Dispatch and Toyota ProAce vehicle models from 2016 onwardsThe camera included in this kit replaces the high level brake light at the rear of the vehicle and provides additional visual..

Reverse view high level brake light camera and video monitor kit specially designed for Mercedes Vito and Viano W639 (2011-2014) vehicle models.The camera included in this kit replaces the high level brake light at the rear of the vehicle and provides additional visual safety to the back of the ..

Provide a full sound upgrade to your Renault front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various Dacia, Fiat, Mitsubishi, Nissan, Renault, Vauxhall vehicles including. Please see our compatibility list for more cars that can benefit from this upg..

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

Complete stereo upgrade fitting kit to install a Single DIN aftermarket car stereo head unit in Citroen C1, Peugeot 108 and Toyota Aygo car models (Without Steering Controls)Package IncludesSingle Din Fascia (Anthracite) Aerial Antenna Adaptor Car Radio ISO Connection Harness..

Cable to retain the original camera or to add an aftermaket camera to select Subaru cars 2015 onwards28 pin connector with phono input for new camera.For base models with the original 6.2" screenIf you are retaining the original camera a 12v to 6v dropper will be required part numbe..

This trim set allows the fitting of a new radio from original to a single din aftermarket version. This trim kit includes 2mm, 4mm and 10mm trim spacers to allow the new radio to be brought forward flush with the cars dash.{ vehicle_compatibility }COLOUR: MATT BLACKCar Audio F..

Antenna adapter cable for cars with ISO connectors that have amplified original antennas.This cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by most car radio manufacturers. It also provides a power feed to give 12v from the car radio to the cars amplified ante..

Multimedia Steering wheel control interface for various Seat and VW cars with select Kenwood models with the EXT/IF (UART) connector.Includes a pre-wired CANbus interface to provide Ignition, Illumination, Steering controls, Reverse signal, Park Pilot screen retention, Climate control display if..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.This interface will retain the use of the steering wheel audio controls with an aftermarket head unit. Suitable for Kia Cee'd and Pro_cee'd car models.For Kia Cee'..

SOT adapter cable for 2017 onward Citroen and Peugeot cars to allow the fitting of an aftermarket handsfree bluetooth phone kit.This SOT adapter cable is designed to allow the fitting of an aftermarket handsfree bluetooth phone kit, such as a Parrot or Bury kit.The adapter lead connects betw..

CANbus steering wheel control interface for Mercedes CLS W219, E Class W211 and SLK R171 cars with original Mercedes NTG1 head units. Gives CANbus Ignition outputs and retains steering wheel controls. The CANbus interface will also give out CAN ignition, speed pulse and reverse gear outputs.Th..

Replacement car audio fascia to enable you to change the original radio in the car to a Single or Double DIN aftermarket version.This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted..

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector.The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is..

Dual-Lens rear view camera specially designed for Mercedes Sprinter and VW Crafter vehicles.This camera replaces the high level brake light at the rear of the vehicle and provides additional visual safety to the back of the vehicle, whilst still maintaining it's original appearance.   ..

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket versionFits Land Rover Freelander (2004-2006) car modelsA removable pocket is included for Single DIN installation.COLOUR: MATT BLACKFor double din installation..

ISO T cable for Volvo cars made before 2000. Fits 850, 940, 960 , S70 S90 . For cars with standard sound systems. Fitted behind the car radio.   This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit. Use when fitting handsfree car kits.This..