InCarTec

Cable to convert Citroen/ Fiat/ Peugeot & Toyota cars with Quadlock connector to a European car radio with ISO connectors.This cable has a loose wire for connecting to an ignition source in the car as their is no traditional + 12v key in ignition supply behind radio. The car has CAN bus data..

Keeps original  USB socket on Subaru BRZ, Trezia and Toyota Verso 2013.   Allows you  to maintain the cars existing AUX socket and use it with a new aftermarket head-unit. This unit uses the cars original housingContains special PCB which replaces the one in the car but keeps the..

BMW Quadlock to ISO connectors for connecting a car to an aftermarket car radio. This harness is for cars without Steering wheel controls and for cars that have a12v ignition supply included in the Quadlock connector.For cars with steering wheel controls please use 29-628Harness Adaptor..

Special rear view camera specially designed for Vauxhall Vivaro, Renault Trafic, Nissan NV300, Mitsubishi Express and Fiat Talento vehicle models.This camera secures into the third (high level) brake light housing on the back of the vehicle and provides additional visual safety to the back of th..

Provide a full sound upgrade to your Toyota front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various Toyota vehicles including Alphard, Auris, Avensis, Hilux, RAV4 and Lexus RX, Daihatsu, Scion, Subaru. Please see our compatibility list for more cars ..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 148.5 mm Ring outside: 166 / 181.5 mm ..

Replacement car audio fascia to enable you to change the original radio in the car to a double DIN aftermarket version Includes cage kit so the aftermarket cage supplied with the new radio will not be needed.Fits Toyota Land Cruiser 200 (2010-2021) cars (WITH ORIGINAL BASIC NO-NAVIGATION RADIOS..

Retain original Camera on Ford Transit Euro 5/6  (With small 4.2 inch screen)This Camera interface cable allows you to retain the original factory fitted camera when fitting an aftermarket head unit on Ford Transit Euro 5 and Euro 6 models (With the smaller 4.2 inch screen display)ONL..

Handsfree ISO T hraness for VW cars made after 2010 with newer style Quadlock connector also fit for Seat & Skoda Cars.Flying ignition for connection 12v IgnitionThis cable fits behind the radio and routes the phone audio through the front speakers.If the original radio connector &nb..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.This interface allows use of cars original steering wheel buttons with a new audio system or navigation unit.Suitable for Saab 9-5 cars (2006-2010) with original fit Denso navi..

Provide a full sound upgrade to your Honda front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various Honda vehicles including Honda Accord, Civic, CR-V, CR-Z, HR-V models. Please see our compatibility list for more cars that can benefit from this upgra..

Car Audio Steering wheel interface for Toyota RAV4 cars allowing use of original buttons with a new aftermarket head-unit.This interface will also retain the use of the original OEM camera.What's Included29-648-RAV4CAM Steering Control Adaptor Stereo Patch LeadWorks with t..

Cable to connect Toyota cars  ( after  1994) with OEM amplifiers  to to a aftermarket car radio using phono line output from the radio. Check that the connector matches the one on the back of your original radio.This cable has  4 phono plug output so must be connected to a h..

Cable to connect Chrysler, Dodge, Jeep car  to an after market European car radio with ISO style connectors. (use for cars without OEM amplifiers and without Steering wheel controls) Use 29-630 for cars with steering controls.Fit most Chrysler Jeep and Dodge models between (02-08) with stan..

Fakra antenna cable adapter  for cars with non-amplified antenna's and single fakra style connectors. Suits BMW, Jaguar, Chrysler, Chevrolet, MercedesThis  converts the cars existing Fakra aerial plug to an aftermarket DIN type used by most car radio manufacturers. it is for cars..

Steering wheel control interface for Mitsubishi Shogun  Outlander, Citroen C-Crosser and Peugeot 4007 vehicles with original fitted navigation head units.This interface will allow you to keep the use of the steering wheel audio controls when replacing the original head unit for an after mar..

A pair of front door car speaker adapter panels for 130mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Fits various models of Vauxhall, Opel and Holden vehicle models. Please see long description for compatibility and fitment ..

Reverse view high level brake light camera and video monitor kit specially designed for Peugeot Expert, Citroen Dispatch and Toyota ProAce vehicle models from 2016 onwardsThe camera included in this kit replaces the high level brake light at the rear of the vehicle and provides additional visual..

ISO T cable for Vauxhall Insignia and new model cars launched after 2008, also for Chevrolet & Holden Cable has all wires filled to cope with all model radios.This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit. Use when fitting hands-free car kits..

Provide a sound upgrade to your Abarth/ Fiat 500 (2008-2016) front doors with our 165mm (6.5 inch) BLAM RELAX 165RC coaxial speaker upgrade fitting kit. Each fitting kit contains a set of BLAM Relax 165RC 165mm (6.5inch) Hi-efficiency 2ohm, 2-Way Coaxial speakers. This speaker upgrade fitting kit is..