49-VW-05 Volkswagen Steering Wheel Control CAN Interface Adaptor Cable
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 5
- Brand: InCarTec
- Model: 49-VW-05
- EAN: 7427282661959
- Warranty: 2 Years Warranty
Description
Product Compatibility Chart
| Make | Model | Years | Notes |
| Volkswagen | Amarok | 2018 - 2022 | |
| Volkswagen | Beetle | 2011 - 2019 | (A5) |
| Volkswagen | Caddy | 2016 - 2020 | (3rd Gen Facelift 2.0) |
| Volkswagen | Jetta | 2010 - 2018 | VI |
| Volkswagen | Passat | 2008 - 2017 | CC |
| Volkswagen | Scirocco | 2008 - 2017 | |
| Volkswagen | Sharan | 2010 - 2022 | II |
| Volkswagen | Tiguan | 2008 - 2016 | |
| Volkswagen | Touran | 2015 onward | II |
| Volkswagen | Transporter | 2015 - 2019 | T6 |
| Volkswagen | Transporter | 2019 onward | T6.1 |
| Volkswagen | UP! | 2012 onward |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Volkswagen (NEW STYLE QUADLOCK) Steering Wheel Control CAN Interface adapter cable
Interface to retain the use of the steering wheel controls in various Volkswagen vehicles including Amarok, Beetle, Caddy and Transporter T6 (WITH NEW STYLE QUADLOCK)
This is a new style Quadlock connector used on select VW vehicles. This can be identified by the 2 larger pins In the corner of the connector
DOES NOT RETAIN ANY MULTIFUNCTION DISPLAY INFORMATION. PLEASE USE ONE OF OUR DISPLAY RETENTION FITTING KITS (FK-699-T6-DMX02, FK-699-T6-ILX) TO ACHIEVE THIS
This interface retains the use of the steering wheel audio controls with a new aftermarket radio including the use of the telephone buttons, answer call, reject call and voice command/Siri (depending on head unit compatibility).
This interface provides CANbus ignition to the new radio and speed pulse, reverse gear and handbrake CANbus outputs.
This adapter will not affect the original parking sensors however it will not display the visual imaging from the original display.
What's Included
- 49-VW-05 Steering Control Adaptor
- Stereo Patch Lead
Works with the following brands
- Alpine
- Clarion
- JVC
- Kenwood
- Pioneer
- Sony
FOR CHINA UNITS YOU WILL NEED 49-000
Patch lead INCLUDED for the steering controls depending on the make of radio being fitted.
| Radio Being Fitted | Part Number | Short Description |
| Chinese/ Unbranded | 49-000 | Patch lead for 49- Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereo. |
| Alpine | 49-001 | Patch lead for 49- series steering wheel control for Alpine stereo. |
| Clarion | 49-003 | Patch lead for 49- series steering wheel control for Clarion stereo. |
| JVC | 49-004SW | Patch lead for 49- series steering wheel control for JVC stereo. |
| Kenwood | 49-005 | Patch lead for 49- series steering wheel control for Kenwood stereo. |
| Pioneer | 49-007 | Patch lead for 49- series steering wheel control for Pioneer stereo. |
| Sony | 49-008 | Patch lead for 49- series steering wheel control for Sony stereo. |
| Zenec | 49-011 | Patch lead for 49- series steering wheel control for Zenec stereo. |
| Universal | 49-025 | Self pinning (instructions included) patch lead for 49- series steering wheel control for Alpine, Clarion, JVC, Kenwood, Pioneer or Sony stereo. |
Please note this is a new style Quadlock connector used on select VW vehicles. This can be identified by the 2 pins on the bottom left of the connector.
TECHNICAL NOTE:
- CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS.
- SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.
IMPORTANT NOTE
- China Branded Headunit, please make sure your unit has 3 wires for connecting the patch lead to the car stereo that you are installing.
- Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.
We try to provide upto date information. If you are unsure about the model number please feel free to contact our customer service and we will be happy to help you selecting correct stalk adaptor for your car.
