InCarTec

Sony 103mm High Double Din Radio CageSONY Radio metal Cage kit designed for 1 DIN chassis (182 x 103mm)Current Sony double DIN radios with single Din Chassis are supplied with a 2 DIN size cage (180mm x 113mm)This cage does not fit some common fascia’s such as Land Rover Discovery ..

CANbus steering wheel control and parking sensor retention interface for cars with quadlock connectors behind the radio.This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also pro..

Interface to connect to the amplifier of a Hyundai as well as interfacing with the steering wheel controls.This interface also includes a reverse signal, speed pulse and parking brake outputs, along with retention for the OEM reverse camera and aux port.MUST BE USED WITH PART 23-235Suita..

D2B fibre optic interface designed to retain the use of the original fibre optic audio amplifier (Usually Bose systems in cars built between 1998 and 2005) in Mercedes cars to allow the fitting of an aftermarket radio upgrade.The interface connects at the back of the radio, it takes the phono au..

A pair of ISO standard speaker adapter cables for various Abarth, Alfa Romeo, Audi, Citroen, Chrysler, Fiat, Holden, Iveco, Jaguar, Lancia, Peugeot, Porsche, Seat, Skoda, Renault, Vauxhall, Volkswagen And Volvo car vehicle models.Use to fit new aftermarket speakers without needing to cut off the..

Provide a sound upgrade to your Toyota, Citroen C1, Peugeot 108, Scion or Subaru front or rear doors with our 165mm (6.5 inch) speaker upgrade fitting kit.Please see our compatibility list for more cars that can benefit from this upgrade kit.This fitting kit allows the fitting of new after..

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in a Renault Master, Nissan NV400, Vauxhall Movano (2020 Onwards) WITH BASIC AUDIOPackage IncludesDouble Din Fascia Panel (Matt Black) Steering Control Interface..

Car radio lead for Mazda cars. Connects the new radio to the cars original connector These cars have a one piece connector behind the radio.{ vehicle_compatibility }For cars with BOSE use with item 20-273Harness AdaptorsConnect the head unit to the original radio connector w..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. 17..

Complete fitting kit to install a double DIN head unit and retain the original steering wheel controls in Ford cars with the original Black oval-shaped radio and CANbus service.This kit includes CAN igntion and illuminations outputs on the steering wheel control interface.Package Includes ..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. If f..

Provide a full sound upgrade to your front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various GM vehicles including Chevrolet, Holden, Vauxhall and Saab 9-4X  . Please see our compatibility list for more cars that can benefit from this upgrade ki..

Steering wheel control interface and adapter cable for Honda Accord, CR-V, CR-Z, Insight and Jazz cars to fit an aftermarket radio upgrade.The cable adapts from the 24 pin Honda connector with a locking latch in the car to standard aftermarket ISO connectors. This replaces the needs for a separa..

ISO adapter harness for Volkswagen group vehicles with quadlock connectors at the back of the radio.This adapter harness is designed to adapt from the original quadlock style connector in the dashboard to a standard aftermarket ISO connector to allow the fitting of a new radio.This lead has ..

Parking sensor buzzer retention interface. For cars that lose the parking sensor tones when the original radio is removed.The original parking tones and warning chimes in many cars are produced by the original radio and when an aftermarket radio is fitted these tones are lost. This CANbus interf..

Complete fitting kit to change the original radio in a Range Rover Sport or Discovery 3 with original Harman/Kardon amplified audio system (not LOGIC7) for a Double DIN aftermarket unit and also retain the use of the original nav/vehicle info display screen.Package IncludesFascia With Cag..

Replacement car audio fascia adapter to enable you to change the original radio in the car to a single DIN aftermarket version. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.Suitable for car models w..

Replacement car audio fascia trim to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. ..

Complete stereo upgrade kit to install a Double DIN aftermarket radio in select Dacia Duster, Dokker, Lodgy, Logan and Sandero car models without steering wheel controls.{ vehicle_compatibility }Package IncludesDouble Din Fascia Adaptor (MATT BLACK) Car Radio Replacement ISO Adaptor..

Nissan radio replacement adapter cable, allows the fitting of an aftermarket car stereo upgrade by adapting the original 10 and 6 pin Nissan connectors to standard aftermarket ISO connectors.This cable includes the power and speaker supply. If the car has steering wheel controls then use item 29..