InCarTec

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. Fasc..

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

3 Metre Male To Female Fakra Antenna Extension Cable3 metre male to female Fakra antenna cable extension. With water blue universal Fakra cable.Used to extend the fakra connector when fitted at the rear of a car...

Lancia  CAN bus Car Audio Steering wheel interface. with later  connector and will suit most car models with CAN radio's after 2007Includes Retained accessory power ,speed pulse, reverse, handbrake and illumination signals. Also includes Amplifier turn on It is supplied c..

Allows you to retain the original OEM factory fitted camera when installing a new aftermarket head unit on select Toyota, Scion and Subaru car models (Display and navigation model radios only).{ vehicle_compatibility } If adding an aftermarket camera to the original system please..

Provide a sound upgrade to your Ford C-Max (2003-2010) front doors with our 165mm (6.5 inch) BLAM RELAX 165RC coaxial speaker upgrade fitting kit.This speaker fitting kit contains a set of BLAM RELAX 165RC 165mm (6.5 inch) Hi-efficiency 2ohm Coaxial speakers.Only suitable for Ford C-Max (2..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version172mm x 98mm. This fascia includes side fixing brackets so no fitting cage is required { vehicle_compatibility }Please use a pocket for Single DIN installation..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionFits Hyundai Santa Fe (2006-2012) car modelsThis kit uses side fixing brackets to secure the new radio, so no cage is neededCOLOUR: SILVERImportant Fascia Notes..

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket version Fits Mitsubishi Lancer (2005-2008) car models.A removable pocket is included for Single DIN installation.COLOUR: DARK GREYIf fitting a double din unit you ..

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. &nb..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. This..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This is a flush fit fascia, the internal dimensions are 173mm wide and 98mm high, this is designed to give a tight fit around standard double din aftermarket units. Some motorised ..

Complete replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia comes with side fixing brackets so no additional fitting cage is required. Fits Vauxhall Viva and Opel Karl built between 2017 and 2019 with two air v..

Citroen / Fiat /  Peugeot Toyota & Vauxhall Quadlock cable to be used in conjunction with an ISO Mute harness normally supplied with the hands-free car kit.With flying lead to connect to +12 volt ignition.This cable fits behind the car radio and is used as a break-out cable to enabl..

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

Suzuki reverse camera retention interface allowing use of the original reverse camera with a new aftermarket head-unit.Retains original reverse camera, includes handbrake output.Reverse 12v output is available on the 29-748 steering wheel control interface.Does not retain steering whee..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 147.5 mm Ring outside: 165.5 mm Ring h..

Replacement steering control loom. Allows connection directly from the stalk paddle to a steering control interface, this bypasses original equipment such as display units, tuner modules and amplifiers that carry the stalk signal which is lost when removing the original head unit{ vehicle_compat..

Cable to connect Chrysler Jeep & Dodge cars made after 2007 with new style radio connector to after-market European car radios with ISO style connectors.Fits  models (07>) with standard audio and without amplifier. These cars are all CAN bus cars and have no 12V ignition feed at the..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.Suitable for Pontiac G3 car models with the new GM style connectors.{ veh..