InCarTec

Complete fitting kit to install a double DIN head unit and retain the original steering wheel controls in a BMW X5 E53Package IncludesDouble Din Fascia Steering Wheel Control Interface Fakra to DIN Antenna Adaptor Universal patch lead (Included)Fascia AdaptorThis adaptor w..

Use this cable to retain an original fitment camera when fitting a new head unit.For General Motors (GM), Chevrolet, Cadillac, and GMC cars and trucks with original equipment navigation and reverse camera which use a 20 pin plug. Check vehicle before ordering for this plug, cars within these yea..

Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio and retain the use of the steering wheel controls in various Skoda Yeti (2009-2014) car models.This kit is suitable for select Skoda Yeti car models with a double Fakra antenna connection on the back of the original ra..

Antenna adapter cable for cars with ISO connectors that have amplified original antennas.This cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by most car radio manufacturers. It also provides a power feed to give 12v from the car radio to the cars amplified ante..

Volvo to Male DIN car aerial antenna adapter cableGrey Volvo antenna connector to male DIN antenna adapter cable.This cable adapts from the grey Volvo antenna connector at the back of the original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket r..

Complete stereo upgrade fitting kit to install a Single or Double DIN aftermarket radio and retain the use of the steering wheel audio controls in select Porsche Cayenne car models with CDR30/ PCM3.0 systems (Quadlock connection) without Bose audio.Package IncludesSingle / Double Din Fasc..

Steering wheel control interface and adapter cable designed for select Hyundai ix35 (2010-2015) vehicles with amplified audio systems (ISO connections behind the radio)Allows you to retain the use of the audio steering control buttons and the factory fitted camera when upgrading to an aftermarke..

A pair of rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical InformationPanel cut out: 146,50 mm Outer diameter: 164,50 mm Ring height: 37,80 mmPle..

A pair of gold plated female to female RCA Phono adaptersUse for joining 2x male phono cables together..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionFascia gap size: 172mm x 98mmThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the origi..

These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Extra depth allows installation of top quality speakers with larger magnetsTechnical DataLoudspeaker: 200 mm Installation cutout: 147.5 mm Ring outside: 210.5 mm Ring height:..

A pair of speaker adapter cables for various Fiat Ulysse, Lancia Phedra and Zeta vehicle models. Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see ..

Toyota Yaris 2011 RHD model Replacement car audio facia to enable you to change the original radio to an aftermarket version.Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is ..

Complete stereo upgrade fitting kit to install a Single or Double DIN aftermarket radio and retain the use of the steering wheel controls in Nissan NV200 (2010-2019) and Chevrolet City Express (2014-2018) car models.Package IncludesSingle/Double Din Fascia Adapter (Matt Black) Steering ..

Female ISO to Male DIN antenna adapter cableThis cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by Clarion, JVC, Pioneer, Sony and other Japanese, Chinese and American radio manufacturers.Aerial AdaptorAn Aerial Adaptor is needed when replacing the origi..

Double Fakra to Male DIN aerial antenna adapter cable (With 12v phantom power)This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.This cable converts the original ..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Replacement car audio..

USB A to USB C Cable (1 Metre) BLACKUSB A to USB C Cable (1 Metre) BLACKUniversal USB-C cable with USB 2.0 specification; features USB-A male to USB-C male connectors, ideal for connecting modern smartphones and devices to standard USB sockets.Reversible Type-C connector High speed ..

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket version, comes with a removable pocket for single DIN fittings and side fixing brackets so no double DIN cage is needed.Fits Chrysler, Jeep and Dodge car models with original..

This cable allows you to add an aftermarket back-up NTSC camera to various Lexus cars (2012 Onwards) with GEN7/GEN8/GEN9 Media-Navigation Systems.Only suitable for 59 pin and 16 pin connectionES series cars of 2012-2018 MY are not supported!..