InCarTec

Car radio fascia adapter panel to allow the fitting of an aftermarket double DIN car radio upgrade for Acura TSX.The fascia adapter allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.This fascia kit uses side fixing bra..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

FLUSH FIT car radio fascia panel adapter with fitting cage to allow the fitting of an aftermarket Double DIN stereo upgrade in various Holden and Vauxhall cars.This fascia kit gives a professional flush mount finish to the installation.172mm x 98mmThis fascia adapter panel is to fit a do..

Adaptor lead to pair an InCarTec 49- series steering wheel control interface to the steering wheel remote input of a Zenec aftermarket radio.This short adapter lead connects to the 12 pin micro molex connector on the 49- series interface box and to the steering wheel remote input on the back of ..

Provide a sound upgrade to your Tesla Model 3 or Y front doors with our 165mm speaker upgrade fitting kit.This kit allows you to fit a set of aftermarket 165mm speakers to your Tesla Model 3 or Y front door panels (SPEAKERS NOT INCLUDED)  This kit also includes the adapter cables to rep..

Steering wheel control interface and adapter cable for Ford Fiesta and Kuga vehicles (with OEM Sony Radio) to fit an aftermarket radio upgrade.The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replaceme..

A pair of speaker adapter cables. Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Sec..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.Suitable for Land Rover Freelander, Discovery 2, Rover 75/800 and MG car modelsThis interface is not for vehicles with original Becker Traffic Pro head units, a different int..

Hyundai Grandeur/Kia Magentis radio antenna cable adapter for converting the original car cable to use with aftermarket head units.This cable converts the car radios existing aerial plug to an aftermarket DIN type used by most car radio manufacturers.For Alpine Radios or others with ISO plug..

A pair of front door car speaker adapter panels for 130mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.These speaker panels also fit the Rover, Honda, Mini, MG, Isuzu models.Technical InformationSpeaker: 13..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Replacement car audio..

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket versionFits Chrysler 300C 1st Gen (2005-2007) car models WITHOUT THE ORIGINAL NAVIGATION SYSTEMCOLOUR: MATT BLACKIf the car has original Navigation use item code 50..

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Fits Subaru Forester (2012 -2018) Legacy (2009 - 2014) and Outback (2009 - 2015) vehicle models. Please see long d..

This rear view camera fits in place of the original rear number plate light, the camera has built in LEDs to replace the original bulb.FeaturesNTSC RCA video Wide 170° viewing angle Super CMOS sensor for high quality night video Dust and waterproof IP67 protection rating Par..

Complete stereo upgrade fitting kit to install a Single or Double DIN aftermarket radio and retain the use of the steering wheel controls in Mercedes SLK R171 (2009-2011) car models with original NTG2/COMAND APS NTG2 radios and non amplified audio systems.This is an alternative fitting kit to FK..

Provide a full sound upgrade to your Abarth, Citroen, Fiat or Vauxhall front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various Abarth, Citroen, Ford, Fiat, Holden, Iveco, Peugeot and Vauxhall vehicle models. Please see our compatibility list for more..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. Fasc..

ISO T cable for Volvo XC90 . Fitted under the drivers seat. Does not cut out centre speaker if fiited to car.  This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit. Use when fitting handsfree car kits.This cable fits at the cars amplifier ..

A pair of front or rear door car speaker adapter panels for 165mm (6.5 inch) speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165mm (5") Installation cutout: 145mm Ring outside: ..