InCarTec

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

Ignition Only Voltage StabiliserPlug and play ignition only voltage stabiliser on ISO power cable for use with aftermarket car radios Operating input voltage 7vdc to 12vdc..

This trim set allows the fitting of a new radio from original to a single din aftermarket version. This trim kit includes 2mm, 4mm and 10mm trim spacers to allow the new radio to be brought forward flush with the cars dash.{ vehicle_compatibility }COLOUR: MATT BLACKCar Audio F..

Universal Single DIN push fit blanking panel with snap-in side clipsCar Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.Please make sure that is the correct Fas..

Grey rectangle female antenna connector to male DIN car aerial antenna adapter cable.This cable adapts from the grey plastic rectangle antenna connector in the car to a standard aftermarket male DIN connector, this is used when fitting a new aftermarket radio.This is a passive antenna adapte..

Double DIN car radio fascia for Toyota RAV4 (XA50) 2019 onwards car models.Only suitable for aftermarket radios with  "L shaped Single DIN chassis" with a chassis at the lower end (e.g. Alpine ILX702D) or for 6.8 inch modular aftermarket head units like (eg. Pioneer EVO62 or EVO64..

Adaptor cable to connect various Chery and DR cars to standard ISO connectors to enable the fitting of an aftermarket head unit.This adapter harness is designed to adapt from the original 16 pin connector in the dashboard of Chery and DR vehicles to standard aftermarket ISO connectors to allow t..

172mm x 98mm. Dacia Lodgy & Dokker 2012 and Duster 2012 on with Visteon AudioAlso fits Renault Captur 2013-2019Replacement car audio fascia to enable you to change the original radio in the car to a double din aftermarket versionColour: GLOSS BLACKThis fascia comes with side fixi..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionFits Chevrolet Corvette C6 (2005-2013), Hummer H3 (2006-2010) and Saab 9-7X (2004 - 2009).This kit uses side fixing brackets for a flush fit, so no radio cage is needed...

Replacement car audio fascia to enable you to change the original radio in the car to a double DIN aftermarket versionFits Toyota Corolla Verso (2004-2009) car modelsThis kit uses the 113mm high cage supplied with after market double DIN radios to fit , if this is missing then our cage with ..

A pair of rear door car speaker adapter panels for 200mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 200 mm Installation cutout: 183.5 mm Ring outside: 211.5 mm Ring height: 40..

Replacement car audio fascia to enable you to change the original radio in select Vauxhall & Holden vehicles the to a Single DIN aftermarket version.The fascia adapter allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio...

Aerial adapter cable for European cars that have the double twin or double  single Fakra connector and amplified original antennas. Maintains cars antenna diversity. Only provides 12v power to the FM antenna not the AM antenna.This cable converts the cars existing fakra aerial plug to an a..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

FLUSH FIT car radio fascia panel adapter with fitting cage to allow the fitting of an aftermarket Double DIN stereo upgrade in various Holden and Vauxhall cars.This fascia kit gives a professional flush mount finish to the installation.172mm x 98mmThis fascia adapter panel is to fit a do..

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in select Vauxhall vehicles.Package IncludesDouble Din Fascia (Matt Charcoal (Rubber Touch)) Double DIN Fitting Cage Steering Control Interface Adaptor Fakra to DI..

For connecting a handsfree kit to the car original harness. Use with Handsfree kit or music streaming  deviceThis cable fits behind the car radio and is used as a break-out cable to divert the audio from the handsfree kit to the cars speakers. It is used in conjunction with the ISO mute cab..

Provide a sound upgrade to your Tesla Model S or X dashboard with our 65mm speaker upgrade fitting kit.This kit allows you to fit aftermarket 65mm speakers to your Tesla Model S or X dashboard panels (SPEAKERS NOT INCLUDED)  This kit provides speaker adapter panels and cables to change ..

USB Retention CableCable to retain the cars original USB port and use it with an aftermarket head-unit..

Pioneer Dometic conversion kit cable for Camper/ Campervan conversions (Grey Connectors)Conversion Kit for campers/ campervans which have the dometic video cable pre-installed from factory but wish to use a Pioneer camera and/or head unit.Compatible with the dometic shadow grey connectors. ..