Ford Single / Double Din Stereo Replacement Kit allows fitment of a Single / Double DIN aftermarket headunit to the selected vehicle. The kit includes fascia, steering control adaptor & aerial adaptor 

Fitting Includes

• Fascia Plate Frame & Pocket (Black)
• M Button Steering Wheel Interface Adaptor
• Fakra to Din Aerial Antenna Adaptor
• Universal Patch Lead

Fascia Adaptor

This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.

Aerial Adaptor

Fakra to Din Antenna Aerial Adaptor, Suitable for Aftermarket Radio With DIN Antenna Connector. Converts car specific antenna connector to a universal aftermarket connector.

An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.

Steering Wheel Interface

Car audio steering wheel control interface designed for select Ford car models with small red/ orange display and M button on the steering wheel.

This cable will retain the use of the vehicles factory steering wheel controls when fitting aftermarket head-unit and allow use of the factory functions on the red/ orange display. 

To access menu functions after installation, you will need to remove the aftermarket hazard switch and plug the original back in.

Suitable for select Ford vehicles with smaller red display with right hand buttons, M button on the steering wheel and the below connections from factory radio. 

Please ensure you check your vehicles original radio connections and compatibility before ordering

Universal Patch Lead

Universal patch lead to be used with InCarTec 29- series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.

This cable plugs into the ICT control box and connects to the 3.5mm socket or single wire on the back of the new head-unit.

This item has loose wires and leads so it can be configured to suit the brand of radio being fitted.

Important Fascia: 

• The fascias are made to suit industry standard sized stereos such as Alpine, JVC, Kenwood, Pioneer, Sony etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare cases "modification"  may be  necessary or needed.
Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the shape & connection in the picture listed is the same as you have in your vehicle. If in doubt please Contact US with your vehicle details and we will confirm what you require.