Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio in Vauxhall Insignia (2008-2013) car models

Package Includes

• Double Din Fascia With Brackets
• Steering Control Interface
• Antenna Adaptor
• Universal patch lead (Included)

Fascia Adaptor

This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.

This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. An additional pocket can be used for a single din installation.

The fascia is designed to fit Vauxhall Insignia A cars from 2008 to 2013. This fascia is not suitable for cars with the ECO button on the dashboard, a different fascia is required.

Steering Control Adaptor

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. 

This interface retains the use of the original audio steering wheel controls and will also provide CANbus ignition, illumination, speed pulse, handbrake and reverse gear outputs.
The steering control interface will also retain the original warning chimes and parking sensor tones.

Aerial Adaptor

An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.  

Fakra to DIN antenna adapter cable with 12v phantom power. This antenna adapter cable adapts from the original Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.

Not suitable for cars with factory fitted NAVI 600 navigation systems

Some minor modifications to the dashboard behind the radio is required in order to fit the new stereo.

Below is an image of the fascia installed

Important Fascia Notes

• The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.