Car Audio Stereo Installation kit for installing a new after market Single din headunit into your Volvo. This is complete kit including Fascia Trim Panel, Steering Control Interface for Volume Controls on Steering Wheel, and Aerial Adaptor.

Package Includes:

• Single Din Fascia (Black)
• Steering Control Stalk Adaptor
• Aerial Adaptors
• Amplified Wiring Harness Adaptor
• Stereo Patch Lead (Free CTMULTILEAD.2 Included)

PLEASE NOTE:

THIS KIT WILL ONLY SUIT DOLBY TYPE FACTORY WIRING WITH FACTORY FITTED AMPLIFIER. STEREO MUST HAVE FRONT AND REAR PRE OUT AVAILABLE.

Fascia Adaptor

This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.

Steering Wheel Interface

A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls or fitted on a stalk next to the steering wheel.

Aerial Adaptor

An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.  

Stereo Removal Keys

Stereo Removal Keys to remove headunit from the facia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one of these units you will require a manufacturer specific stereo removal key to prevent damage to the head unit or the surrounding facia and cage.

Amplified Wiring Harness Adaptor

This adapter is required when replacing your amplified factory fitted radio with an aftermarket radio. It will convert the original vehicle speaker wiring connectors to RCA connectors. Simply plug one end of the adapter into your cars wiring harness and the RCA connectors into your new radio. You will need to purchase and fit the relevant Volvo ISO harness adapter to supply power, please see parts CT20VL*

CTMULTILEAD.2 Universal Patch Lead

Patch Lead connects a compatible car stereo with a joystick input (blue line-in mini-jack) or wire input on the back of the unit to the existing stalk/steering wheel controls of the vehicle.

Compatible Aftermarket Headunits

• Alpine (3.5mm jack)
• Beat (single wire connection)
• Chinese / Xtrons / 3 wire unbranded units (3 wire connection)
• Clarion (3.5mm jack)
• JVC (3.5mm or single wire)
• Kenwood (single wire)
• LG (3.5mm jack)
• Nakamichi (single wire connection)
• Panasonic  (single wire but NOT AV units)
• Philips (single wire connection)
• Pioneer (3.5mm jack)
• Sony (3.5mm jack)
• Zenec  (single wire)
• Other Chinese SWC learning head units
• EONON
• JOYING
• XTRONS
• PUMPKIN

Important Patch Lead Notes

• You can simply cut the loops / wires to select which brand you are fitting. Supplied with instruction sheet
• This patch lead CANNOT be used for Blaupunkt / Parrot / Becker / JVC KW-AVX head units / Older Kenwood units with the DIN plug. For those models you need to purchase the lead from the add-on options.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.