Complete stereo upgrade fitting kit to install a Double DIN aftermarket car stereo head unit and retain the use of the steering wheel audio controls in select Hyundai I10 (2013-2019) car models. 

Package Includes

• Double Din Fascia with Brackets (Matt Black)
• Steering wheel control interface
• Antenna Adaptor
• Universal patch lead (Included)

TO RETAIN USE OF THE USB/AUX PORTS YOU WILL REQUIRE OUR PART NUMBER 24-240

FOR CARS WITHOUT STEERING WHEEL CONTROLS PLEASE USE FK-969

For Single DIN fitting please use an additional pocket, part number 50-058

Fascia Adaptor

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN after market version in a Hyundai I10. This fascia is for right hand drive cars and has mounting point for the original hazard switch and passenger airbag light units.

This fascia has side fixing brackets so there is no need for a radio cage.

Steering Control Adaptor

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. Includes ISO power and speaker wiring to connect the car to the aftermarket head-unit. This interface includes PHONE commands for compatible Bluetooth head-units.

Some model Kia and Hyundai cars have original fit amplifiers. If the car has the original fit amplifier it will often have ISO connectors, the amplifier is a digital switch on and will need to be bypassed. This interface is not suitable for cars with an original amplifier.

Aerial Adaptor

antenna cable adapter for converting the original car radio plug to use with aftermarket head units. This cable converts the car radios existing aerial plug to an aftermarket DIN type used by most car radio manufacturers.

Universal Patch Lead

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the 29-Series control box and connects to the 3.5mm socket or single wire on the back of the new head-unit.
Suitable for Use with Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.

Important Fascia Notes: 

• The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.