Complete stereo upgrade fitting kit to install a single or double din aftermarket radio and retain the use of the steering wheel controls in a EURO 6 Ford Transit with 4 inch display and OEM passanger airbag light.

Package Includes

• Double Din Fascia with Brackets
• Steering wheel control interface
• AM/FM Antenna Adaptor
• Ford OEM Passenger Air Bag Light Assembly
• Universal patch lead (Included)

This kit comes with a dark grey car radio fascia adaptor panel to allow the fitting of an aftermarket single or double din car radio upgrade.
The fascia adaptor (50-968) allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. The fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. A spare pocket is supplied for fitting a single din stereo.

Below are examples of an original Ford dashboard with the lock and hazard buttons and with and without the original airbag status light units. 

Aftermarket fascias for these cars have holes for the button and light units. Depending on what is fitted originally will determine what additional buttons, light units or blanking units are required.

Fascia Adaptor

This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.

Steering Control Adaptor

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. 

Aerial Adaptor

An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.  

A Fakra to DIN antenna adapter 21-106) is also included in the kit, this adapts from the original style antenna connector in the van, known as a Fakra connector, to a standard aftermarket antenna connector, known as a din connector.

Universal Patch Lead

A universal patch lead (29-CT-025) is included too, this is used to match the steering wheel control interface with the brand of radio that's being fitted.

A OEM passenger airbag light assembly (FORD-F1799698) is supplied with this kit, this is used when the original passenger airbag light is built into the original radio.

PLEASE NOTE:

Installation of this kit will result in the OEM display being lost.

PLEASE NOTE:

If the vehicle had a passenger airbag status light built into the original radio, install the new passenger airbag light (FORD-F1799698)  into the new radio fascia panel, failure to refit one will cause airbag warning lights to show on the instrument cluster.

See the image below for examples of the components fitted into a fascia.

Important Fascia Notes: 

• The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.