Car radio fascia adapter panel to allow the fitting of an aftermarket Single DIN car stereo upgrade.

The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.

This fascia is supplied with side fixing brackets so a radio can be installed without the need for a fitting cage

Suitable for fitting Volkswagen Crafter (2017 onwards) vehicles

Fascia Installation

Behind the original radio there is only space for a Single din radio chassis or a slim chassis/ modular head unit (maximum mounting depth for the aftermarket radio of 55mm)

This is due to the lower section behind the radio has the ducts for the air vents.

Careful attention needs to be paid to the radio that is to be fitted and the modifications that may be required, either to the fascia kit or the vehicle.

We strongly recommend the installation is done by an experienced car audio technician only

See the image below that shows the available space behind the original radio

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Fascia for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.