InCarTec

ISO adapter harness for fitting a new stereo in an Audi A4, A4 Cabriolet or A6 with an original RND-D (Navigation Plus) radio the basic rear amplified audio system.Also suitable for Audi TT built before November 2001.This harness adapts from the original ISO and Mini ISO connectors at the ba..

Standard two prong radio release keys used on Blaupunkt, Grundig, VDO, Philips style radios.STEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent ster..

Complete fitting kit to install a Double DIN aftermarket head unit and retain the original steering wheel controls in Subaru Forester (2008-2015) car models with a factory fitted Kenwood Navigation head unit. This fitting kit will also retain the use of the original OEM factory fitted camera.Pac..

Reverse view high level brake light camera and video monitor kit specially designed for Iveco Daily (2015 Onwards) vehicle models.The camera included in this kit replaces the high level brake light at the rear of the vehicle and provides additional visual safety to the back of the vehicle, whils..

Complete Replacement Single/ Double DIN stereo upgrade fitting kit for Mazda 6 when replacing original OEM head unit with an aftermarket radio. Supplied interfaces allows you to retain the climate control and steering wheel controls.Complete Replacement Single/ Double DIN stereo upgrade fitting ..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

Provide a sound upgrade to your Nissan NV200 (2010-2019) front doors with our 165mm (6.5 inch) BLAM RELAX 165RS component speaker upgrade fitting kit.This fitting kit contains a set of BLAM RELAX 165RS 165mm (6.5inch) Hi-efficiency 2ohm, 2-Way Component car audio speakers.This fitting kit ..

Car radio iso lead for Hyundai and Kia cars Connects the new radio to the cars original connector For Kia and Hyundai cars with 16 pin connectors at the back of the original radio.{ vehicle_compatibility }Harness AdaptorsConnect the head unit to the original radio connector without the n..

Complete cage kit and replacement car audio fascia trim to enable you to change the original radio in the car to a Double din aftermarket version.This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original O..

Provide a sound upgrade to your Toyota or Subaru Impreza front or rear doors with our 165mm (6.5 inch) speaker upgrade fitting kit.Please see our compatibility list for more cars that can benefit from this upgrade kit.This fitting kit allows the fitting of new aftermarket speakers, the spe..

CANbus interface to maintain the steering wheel controls on select Nissan vehicles in Visia specification.This interface will also adapt from the original radio connectors in the car to standard after market ISO connectors.Provides a CANbus, powered antenna, ignition output, speed pulse, rev..

Replacement car audio fascia to enable you to change the original radio in the car to a double DIN aftermarket version Includes cage kit so the aftermarket cage supplied with the new radio will not be needed.This FLUSH FIT fascia makes it easier to adjust the fascia to the new aftermarket radio,..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. Fasc..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.This interface allows use of cars original steering wheel buttons with a new audio system or navigation unit.Suitable for: Saab 9-3 (1998-2003),  Saab 9-5 pre-facelift car..

Special adapter lead for the fitting of a Mercedes Audio 20 head unit into a vehicle with an original Audio 5 head unit.Mercedes Audio 20 quadlock to Audio 5 ISO adapter harness.Allows the fitting of an Audio 20 head unit into a vehicle that was originally fitted with an Audio 5 head unit. ..

Car radio adapter cable for converting BMW style 17 pin connector  to  ISO connectors suitable for European after-market car radio's connectors.Suits older BMW, Mini cars and some Land Rover &  Rover models.for BMW 5 series E39 check the radio connector first as it c..

Speaker adapter cable used to connect aftermarket speakers to the original connectors in the cars, These 2 way connectors fit many models of Japanese cars.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of c..

Replacement car audio facia to enable you to change the original radio in the car to a Double DIN aftermarket version.This facia has side fix brackets so no cage is needed Fits Vauxhall Monaro (2001-2007) car models172mm x 98mmImportant Fascia NotesThe fascias are made to..

Steering wheel control interface and adapter cable for Volkswagen, Seat and Skoda cars to fit an aftermarket radio upgrade.The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. ..

Complete stereo upgrade fitting kit to install a single DIN head unit into various 2005 onwards Volkswagen car models.This kit is suitable for VW car models with a Single Fakra antenna connection on the back of the original radio Includes a pre-wired CANbus interface to generate a key p..