InCarTec

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Replacement car audio..

Car Audio Steering wheel control interface allowing use of the original buttons with a new aftermarket head-unit.Suitable for Saab 9-3/ 9-5 cars with GM LAN bus connectors behind the radio.This interface provides ignition, illumination, speed pulse, reverse gear signal for 9-3 models and Ign..

CANBUS steering wheel control interface for Mercedes with original Mercedes Comand APS NTG2.5 head units.This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus ou..

Cable to add a camera to the existing Nissan 4.3inch screen  on select Nissan cars 2015 onwardsThis is for cars with the 32 pin connector behind the original screen. can be used to add a camera to original screen or maintain original camera to aftermarket screen.Not suitable for the BIR..

Speaker adapter cables; used to connect after market tweeters to the original loom on various Volkswagen, Skoda and Seat models.Fits models built after 1996. Suitable for both front and rear tweeters. Pack contains a pair of cables (enough for two doors for example)May not fit all versions o..

Complete stereo upgrade fitting kit to install a Single / Double DIN aftermarket radio in various Volkswagen carsThis kit also fits various Skoda and Seat cars. Suitable for Skoda Superb cars with the original Columbus navigation radio.Package IncludesSingle DIN Flush Fit Fascia Adap..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. 172m..

Complete stereo upgrade kit to install an aftermarket Single DIN head unit Audi TT (8N) (1998-2006) with half or fully amplified sound systemsPackage Includes:Single Din Fascia Panel ISO Radio Adaptor Harness with CANBus Ignition For Amplified Cars ISO to DIN Antenna Adaptor Lead with..

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 144 mm Outside ring: 163 mm Ring height: 25.7 ..

A pair of Speaker adapter cables used to connect after market speakers to the original loom.{ vehicle_compatibility }Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by..

Volkswagen (NEW STYLE QUADLOCK) Steering Wheel Control CAN Interface adapter cableInterface to retain the use of the steering wheel controls in various Volkswagen vehicles including Amarok, Beetle, Caddy and Transporter T6 (WITH NEW STYLE QUADLOCK)This is a new style Quadlock connector use..

Double Fakra to Male DIN aerial antenna adapter cable (With 12v phantom power)This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.This cable converts the original ..

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in BMW 3-Series (F30, F31, F34) and 4-Series (F32, F33, F36) car models (WITH MOST-AMPLIFIED SYSTEMS)This kit also retains the OEM factory climate controls, as well as th..

Car radio fascia adaptor panel to allow the fitting of an aftermarket single or double DIN  car radio upgrade.The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.Use the supplied pocket with the f..

Steering wheel control interface and adapter cable for Audi cars with ISO connectors and BOSE or SYMPHONY original systems. Adaptor cable to fit a new radio to the original connectors in the car with a built in interface to retain the use of the original radio steering wheel controls when fitting an..

Replacement car audio fascia to enable you to change the original radio in the car to a single DIN aftermarket version Fits Abarth 500 (2008-2016) car models{ vehicle_compatibility }COLOUR: MATT BLACKCar Audio Fitting Accessories are sold with limited instructions. Some knowledge ..

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. Suit..

SOT Handsfree Mute ISO Adaptor CableSOT adapter cable for Toyota vehicles to allow the fitting of an aftermarket handsfree Bluetooth phone kit.Can also be used as a breakout cable for fitting an aftermarket amplifier to an original head radio.This SOT adapter cable is designed to allow t..

Complete stereo upgrade fitting kit to install a Single or Double DIN aftermarket radio in Seat Ibiza car models WITHOUT HEATED SEATSThis fitting kit allows you to replace the original factory fitted head unit in the vehicle with a new aftermarket Double DIN version, retaining the original dashb..

CANbus interface to maintain the steering wheel controls. This interface will also adapt from the original SYNC 2.5 connector in the car to standard after market ISO connectors. Provides a CANbus, powered antenna, ignition output, speed pulse, reverse gear signal and hand brake signal.What'..