InCarTec

12V to 6V voltage converter for original reverse camerasCars original camera's are often powered by 6v or 8v power .This often comes from the original radio head-unit, so if this is removed to fit a new head-unit the camera will need a new 6v supply.If you use 12v you will often burn-out..

Freelander 2, Discovery 3 and Range Rover Sport with standard audio system. Car Audio Steering wheel interface and iso connectors allowing use of original buttons with a new aftermarket head-unit.For Freelander with Parking sensors use item 25-518-PDC in addition to this interface.NOT SUIT..

4 Pin Male to RCA Phono Converter Cable (With Male Adaptor)Converts  4 PIN male camera connector to RCA phono. (with male adapter)Use for converting 4 PIN camera's to RCA so that you can connect 4 PIN camera's to aftermarket Screens amd Monitors ..  ..

Complete stereo upgrade fitting kit to install a Single or Double DIN aftermarket radio and retain the use of the steering wheel controls in Honda CR-V (2007-2011) car models (WITH ORIGINAL TYPE 2VNO NAVIGATION RADIO)Package IncludesFascia With Brackets and Pocket Steering Control Inter..

Double Fakra to Male DIN aerial antenna adapter cable (With 12v phantom power)This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.This cable converts the original ..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical InformationSpeaker: 165 mm Panel cut out: 147.5 mm outer diameter: 216.5 mm x 160.5 m..

Audio cable for Honda Civic and CRV made after 2006, allowing use of the original buttons when fitting a Chinese aftermarket car radio stereo upgrade. Provides power and speaker connections from the car.This plug and play cable allows you to connect a Chinese aftermarket car radio with European ..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionIncludes cage kit so the aftermarket cage supplied with the new radio will not be needed.The fascia is angled to allow the cage to fit tilting backwards for an easier fit int..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 148.5 mm Ring outside: 166 / 181.5 mm ..

A pair of front or rear door car speaker adapter panels for 130mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.{ vehicle_compatibility }Technical InformationSpeaker: 130 mm Panel cut out: 122 mm Outer d..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionFits Subaru car modelsCOLOUR: MATT BLACKOnly for cars that do not have factory fitted satellite navigation. Important Fascia NotesThe fascias are made..

Car radio fascia adaptor panel to allow the fitting of an aftermarket single din car radio upgrade.The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.This fascia kit uses side fixing brackets, the bra..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 146 mm Ring outside: 195 / 167.5 mm Ri..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

Complete fitting kit to install a Single/ Double DIN head unit and retain the original steering wheel controls in Lexus RX (2003-2009) vehicles with factory fitted Mark Levinson Navigation systems. This fitting kit will also retain use of the top screen for both navigation and air con visualisation ..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. This..

Nissan with Bose radio replacement adapter cable, allows the fitting of an aftermarket car stereo upgrade by adapting the original 20 pin Nissan connector to standard aftermarket ISO connectors. This adapter cable also retains the use of the original Bose amplifier by using the preout connections on..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.Fits cars with the white 20 way car audio connector that has two larger size t..

Amplifier bypass cable for Lexus IS 200,GS430,, LS430, RX300.  Allows you to connect a new aftermarket radio directly to the cars speakers after bypassing the original amplifier which is behind the passenger glovebox.Fots cars with Lexus Amplifier On RX300 the amplifier is behind the rear..