InCarTec

A pair of rear speaker adapter panels to fit 130mm speakers in the back of a 2018> Suzuki JimnyThese panels allow you fit speakers as most Jimnys do not have rear speakers as standard, but do have speaker wiring to the back.NEW SPEAKERS MUST BE 130MM IN DIAMETER AND NO DEEPER THAN 48MM ..

Nissan radio replacement adapter cable, allows the fitting of an aftermarket car stereo upgrade by adapting the original 10 and 6 pin Nissan connectors to standard aftermarket ISO connectors.This cable includes the power and speaker supply and will return the use of the steering wheel controls w..

Special rear view camera specially designed for VW Crafter (2017 Onwards) vehicle models.This camera secures on top of the third (high level) brake light housing on the back of the vehicle and provides additional visual safety to the back of the vehicle, whilst still maintaining it's origina..

Complete fitting kit to change the original radio in a Discovery 3 or a Range Rover Sport with original Harman/Kardon amplified audio system (not LOGIC7 system) and without the touch screen navigation for a Double DIN after market head unit.Package IncludesDouble Din Fascia With Cage (Mat..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.This interface will retain the use of the steering wheel audio controls with an aftermarket head unit, as well as telephone buttons/ phone commands.Also provides vehicle speed ..

Provide a sound upgrade to your front or rear doors with our 165mm (6.5 inch) speaker upgrade fitting kit.Please see our compatibility list for more cars that can benefit from this upgrade kit.PLEASE NOTE: This fitting kit allows the fitting of new aftermarket speakers, the speakers themse..

Audio cable for Hyundai cars. Converts the factory harness to female ISO connectors for connecting an after-market European car radio. Use for cars with the standard audio system without Steering wheel control. Harness AdaptorsConnect the head unit to the original radio connector with..

If you are replacing the radio in your vehicle, this antenna cable adapter ensures that you can continue to use your factory antenna.It is a simple yet necessary cable that adapts the vehicle’s original antenna cable to plug into an aftermarket radio with a male Motorola™ connector o..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.Steering wheel control interface and adapter cable Citroen C1, Peugeot 108 an..

Provide a sound upgrade to your Tesla Model S and X (WITH OEM STANDARD AUDIO) front doors with our 130mm speaker upgrade fitting kit.This kit allows you to fit a set of aftermarket 130mm speakers to your Tesla Model S or X front door panels (SPEAKERS NOT INCLUDED)  This kit also include..

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket versionA pocket is provided for Single DIN installation. If using for Double DIN installation then you will need to cut the central bar of the fascia.COLOUR: MATT BLACK ..

CANbus steering wheel audio control for select Renault vehicles (2008-2012) with quadlock connections behind the original radioThis interface will retain the use of the steering wheel control buttons when fitting an after market head unit, as well as providing CANbus outputs, ignition, illuminat..

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in a 2010 onwards Vauxhall Movano, Renault Master or Nissan NV400 van.Package IncludesDouble DIN Fascia With Side Fix Brackets (Matt Black) Steering Control Inter..

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in select Vauxhall vehicles.Package IncludesDouble Din Fascia (MATT CHROME/ SILVER) Double DIN Fitting Cage Steering Control Interface Fakra to DIN Aerial Adaptor,..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.This interface has power and speaker ISO connection allowing will the use of the steering wheel audio controls with an aftermarket head unit. This interface fits cars with..

Steering wheel control interface and adapter cable for various Mercedes cars to fit an aftermarket radio upgrade.The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.The CANbu..

A pair of speaker adapter cables for various Abarth, Fiat, Ford, Mazda and Jaguar vehicle models. Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.May not fit all versions of every vehicle. Some amplified and named sound systems such as BOSE, or Bow..

A pair of front door car speaker adapter panels for 165mm speakers. These MDF panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 144 mm Ring height: 32 mmPlease make..

Seat Ibiza (2014-2017) button relocation harness.This is used to relocate the original hazard and passenger airbag buttons when fitting an aftermarket head unit.Suitable for Seat Ibiza (2014-2017) car models with heated seats. This cable fixes the problem with not be able to reset the tyre p..

Male to female ISO connectors for connecting a European car radio to cars with ISO style connectors.This cable is an extension of the iso wiring. It is usefull on car radio's with recessed iso connectors in the back of the head-unit as the cables on the car loom may not be long enough.Ha..