InCarTec

This interface will allow you to retain the use of the steering wheel controls in a Vauxhall Vivaro, Renault Trafic, Nissan NV300 or Fiat Talento van with an original fit navigation unit.This interface also adapts from the white connector in the vehicle to standard after market ISO connectors. ..

172mm x 98mm. Holden Astra PJ complete replacement car audio fascia to enable you to change the original radio in the car to a double din aftermarket version.Use a pocket if you wish to fit a single din unit.The kit has side fixing brackets which attach on the the side of the new double Din ..

ISO T cable for Vauxhall, Holden & Pontiac cars with 2 digit radios like CD30, CD40 CD70, Cable has all 40 wires filled to  cope with all model radios. This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit. Use when fitting hands-free car ..

Use this cable to retain an original fitment camera when fitting a new head unit.For General Motors (GM), Chevrolet, Cadillac, and GMC cars and trucks with original equipment navigation and reverse camera which use a 20 pin plug. Check vehicle before ordering for this plug, cars within these yea..

Provide a sound upgrade to your Ford B-Max (2012-2018) front or rear doors with our 165mm (6.5 inch) BLAM RELAX 165RC coaxial speaker upgrade fitting kit.This speaker fitting kit contains a set of BLAM RELAX 165RC 165mm (6.5 inch) Hi-efficiency 2ohm Coaxial speakers.For a speaker and tweet..

Antenna adapter cable for cars with ISO connectors that have amplified original antennas.This cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by most car radio manufacturers. It also provides a power feed to give 12v from the car radio to the cars amplified ante..

Hyundai Grandeur/Kia Magentis radio antenna cable adapter for converting the original car cable to use with aftermarket head units.This cable converts the car radios existing aerial plug to an aftermarket DIN type used by most car radio manufacturers.For Alpine Radios or others with ISO plug..

Replacement car audio fascia to enable you to change the original radio in the car to a single DIN aftermarket version{ vehicle_compatibility }COLOUR: MATT BLACKCar Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, a..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes ISO power and speaker wiring to connect the car to the aftermarket head-unitThis interface will retain the use of the steering wheel audio controls with an aftermarket he..

Speaker adapter cables;  used connect the aftermarket speakers.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the shape of adaptor in the pictu..

A pair of gold plated female to female RCA Phono adaptersUse for joining 2x male phono cables together..

A pair of Male to Female Right Angled RCA phono Adaptors (1 Red - 1 Black) Set at a 90 Degree angle, making them perfect for use In tight installation places..

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector.The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is..

A pair of Speaker adapter cables used to connect after market speakers to the original loom on various Daihatsu vehicle models.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secon..

cars with 16 pin connector cable to connect the cars harness  to an after-market European car radio with ISO style connectors.Provides power and speaker connections{ vehicle_compatibility }Harness AdaptorsConnect the head unit to the original radio connector without the nee..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionFits Renault Master, Nissan NV400 and Vauxhall Movano (2020 Onwards) vehicles.This kit uses side fixing brackets to mount the new radio for a flush fit, so no cage is require..

Car radio fascia adaptor panel to allow the fitting of an aftermarket Double DIN Car radio upgrade.The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.This fascia kit uses side fixing brackets, the bra..

Side fixing car radio fascia panel adapter with side fixing brackets to allow the fitting of an aftermarket Double DIN stereo upgrade in various Vauxhall cars.This fascia kit gives a professional flush finish to the installation, and doesn't require a radio cageThis fascia adapter panel ..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in select Vauxhall vehicles.Package IncludesDouble Din Fascia (GLOSS GREY/STEALTH BLACK) Double DIN Fitting Cage Steering wheel control interface Fakra to Din..