InCarTec

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 142 mm Ring outside: 163.5 mm Ring height: 13 ..

Car Audio Steering wheel interface allowing use of the original audio buttons with a new after market head-unit. Suitable for Nissan NV400, Vauxhall Movano and Renault Megane, Twingo, Master and Clio with two white connectors behind the radio and a separate display.This interface includ..

172mm x 98mm. Holden Astra PJ complete replacement car audio fascia to enable you to change the original radio in the car to a double din aftermarket version.Use a pocket if you wish to fit a single din unit.The kit has side fixing brackets which attach on the the side of the new double Din ..

Adaptor lead to pair an InCarTec 49- series steering wheel control interface to the steering wheel remote input of a Sony aftermarket radio.This short adapter lead connects to the 12 pin micro molex connector on the 49- series interface box and to the steering wheel remote input on the back of a..

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in a 2010 onwards Vauxhall Movano, Renault Master or Nissan NV400 van.Package IncludesDouble Din Fascia with Side Fix Brackets Steering wheel control interface Fakra..

Complete stereo upgrade fitting kit to install a Single DIN aftermarket car stereo head unit in Citroen C1, Peugeot 108 and Toyota Aygo car models (Without Steering Controls)Package IncludesSingle Din Fascia (Anthracite) Aerial Antenna Adaptor Car Radio ISO Connection HarnessFas..

Complete fitting kit to change the original radio in a 2007 - 2013 Mitsubishi Outlander for a double din after market unit.Package IncludesDouble Din Fascia With Brackets (Matt Black) Steering wheel control interface Universal patch lead (Included)Fascia AdaptorThis adaptor ..

This trim set allows the fitting of a new radio from original to a single din aftermarket version. This trim kit includes 2mm, 4mm and 10mm trim spacers to allow the new radio to be brought forward flush with the cars dash.{ vehicle_compatibility }COLOUR: MATT BLACKCar Audio F..

Multimedia Steering wheel control interface for various Seat and VW cars with select Kenwood models with the EXT/IF (UART) connector.Includes a pre-wired CANbus interface to provide Ignition, Illumination, Steering controls, Reverse signal, Park Pilot screen retention, Climate control display if..

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector.The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This kit is supplied with side fixing brackets to mount the new radio for a flush fit, so no cage is required. For single DIN fitting a universal pocket will need to be acquired. ..

Reverse view high level brake light camera and video monitor kit specially designed for Fiat Doblo (2010-2021) and Combo D (2011-2017) vehicle models.The camera included in this kit replaces the high level brake light at the rear of the vehicle and provides additional visual safety to the back o..

Reverse view high level brake light camera and video monitor kit specially designed for Volkswagen Transporter T5 (2003-2015) vehicle models with Tail Lift doors.The camera included in this kit replaces the high level brake light at the rear of the vehicle and provides additional visual safety t..

A pair of speaker adapter cables for various Abarth, Fiat, Ford, Mazda and Jaguar vehicle models. Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.May not fit all versions of every vehicle. Some amplified and named sound systems such as BOSE, or Bow..

Reverse camera for 2010 onward Vauxhall Movano, Renault Master and Nissan NV400 vans.12v power Colour CMOS image, NTSC. 150° View Angle IP68 Waterproof 35ft night vision distance Includes power cable and 10 meter video cableBelow is an image of the camera and supplied cabl..

Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio and retain the use of the steering wheel controls in various Skoda Yeti (2009-2014) car models.This kit is suitable for select Skoda Yeti car models with a single Fakra antenna connection on the back of the original ra..

SOT harness for Abarth, Fiat, Alfa Romeo, Citroen, Jeep, Lancia, Peugeot, Vauxhall cars that have the new style large connector at the back of the radio. Use this harness to install an aftermarket handsfree kit to your vehicle.This cable fits behind the car radio and is used as a break-..

This fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fi..

Handsfree ISO T harness for Renault and  Dacia cars made after 2011 newer style connector. This cable has complete pass through of both connectors behind radio. Includes ignition supply feed.Renault cars that use this lead have a radio that has a display built into the radio itself..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car radio fascia adap..