All Products

Replacement car audio fascia to enable you to change the original radio in the car to a double DIN aftermarket versionFits Toyota Corolla Verso (2004-2009) car modelsThis kit uses the 113mm high cage supplied with after market double DIN radios to fit , if this is missing then our cage with ..

Speaker adapter cables;  used connect the aftermarket speakers.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the shape of adaptor in the pictu..

A pair of front door, rear side or rear column car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.{ vehicle_compatibility }Please make sure that is the correct Speaker Adaptor for your v..

A pair of front door car speaker adapter panels for 165mm speakers. These MDF panels allow you replace the cars original speakers with new improved quality aftermarket speakers.An alternative 200mm speaker ring is available here: 40-1893W-200Technical DataLoudspeaker: 165 mm ..

Car Audio Stereo Installation kit for installing a new after market single din headunit into your vehicle. This is complete kit including Fascia Trim Panel, Steering Control Interface for Volume Controls on Steering Wheel, Aerial Adaptor and keys to remove your old stereo.   Packa..

Recoil RLM65 Level‑3 6.5″ Component Speaker SystemDrive your sound to the next level with the Recoil RLM65 Level-3 Series 6.5" Component Speaker System. With 80W RMS (160W peak), vibrant yellow pressed-paper cones and nitrile rubber surrounds deliver punchy mid-bass and fast response...

Replacement car audio fascia to enable you to change the original radio in select Vauxhall and Holden vehicles the to a Single DIN aftermarket version.The fascia adapter allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. ..

Upgrade your vehicle with this complete stereo fitting kit for Ford Transit Euro 6 (2016–2019), designed to install an aftermarket single or double DIN head unit while retaining key factory features.This kit is specifically designed for vehicles with a factory passenger airbag light integr..

SOT harness for Abarth, Fiat, Alfa Romeo, Citroen, Jeep, Lancia, Peugeot, Vauxhall cars that have the new style large connector at the back of the radio. Use this harness to install an aftermarket handsfree kit to your vehicle.This cable fits behind the car radio and is used as a break-..

Double DIN car radio fascia for Citroen Berlingo, Peugeot Partner and Rifter, Toyota ProAce City and Vauxhall/Opel Combo E (2018 onwards) vehicle models.Only suitable for aftermarket radios with  "L shaped Single DIN chassis" with a chassis at the lower end (e.g. Alpine ILX705D) o..

URGENT NOTE: PLEASE CONTACT US PRIOR TO PURCHASING THIS ITEM, EMAIL US A PICTURE OF YOUR ORIGINAL STEREO AND CONFIRM THE MAKE, MODEL AND YEAR OF YOUR VEHICLE.Upgrade your Audi A3 (8P) with a modern 9-inch multimedia receiver while maintaining a clean factory-style dashboard appearance. This co..

Use this cable to retain an original fitment camera when fitting a new head unit.For General Motors (GM), Chevrolet, Cadillac, and GMC cars and trucks with original equipment navigation and reverse camera which use a 20 pin plug. Check vehicle before ordering for this plug, cars within these yea..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

Provide a full sound upgrade to your Abarth, Citroen, Fiat or Vauxhall front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various Abarth, Citroen, Fiat, Holden, Iveco, Peugeot and Vauxhall vehicle models. Please see our compatibility list for more cars ..

172mm x 98mm. Vauxhall Astra J & Holden Astra PJ Complete replacement car audio fascia to enable you to change the original radio in the car to a double din aftermarket version.Use a pocket if you wish to fit a single din unit.The kit has side fixing brackets which attach on the the side..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

ISO T cable for Vauxhall, Holden & Pontiac cars with 2 digit radios like CD30, CD40 CD70, Cable has all 40 wires filled to  cope with all model radios. This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit. Use when fitting hands-free car ..

Package IncludedFocal ACX 130 5.25" 13CM 2-way Coaxial Car Speaker (Sold As Pair) 130mm Front Door Speaker Adaptor Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit{ vehicle_compatibility }The 2-way coaxial kit ACX 130 delivers neutral and dyna..

Bluetti B4810 Parallel Wiring Kit Short2G(35MM) . 100MM LONG + DATA CABLE..

ACM-4.300 Four Channel Micro AmplifierACM series amplifiers by AudioControl are the perfect blend of power and features for car audio systems from mild to wild. Compact size, high power and the ability to help integrate with factory stereo systems are features that assure “Making Good Soun..