VW Transporter T5 RCD200 Car Stereo Wiring ISO & Aerial Fitting Kit
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 10
- Brand: Dynamic Sounds
- Model: FKIT-VW-20
- EAN: 3779329114244
- Warranty: 2 Years Warranty
Available Options
Description
Volkswagen Stereo Replacement Kit, allows the fitment of a Single / Double DIN aftermarket headunit to the selected vehicle. This kit includes, Wiring Harness, Aerial Adaptor and Stereo removal keys.
Package Includes
- Wiring Harness Adaptor (non-amplified systems only)
- Stereo Removal Keys
Product Compatibility Chart
Make | Model | Years | Notes |
Volkswagen | Transporter | 2006 - 2009 | T5 , RCD200 Stereo |
This is to replace the RCD200 Stereo, Quadlock Connection only
Wiring Harness
The wiring harness will allow to install the stereo.
Note: You will need to connect the red wire to the ignition supply in the fuse box.
Stereo Removal Keys
Stereo Removal Keys to remove headunit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one of these units you will require a manufacturer specific stereo removal key to prevent damage to the head unit or the surrounding fascia and cage.
Please Note
- Red wire has to be connected to a separate ignition feed in the vehicle to make aftermarket head unit to power up
- Orange cable requires connection to illumination wire but only if the radio requires this for dimming purposes at night.
- Blue wire needs to be connected to the Remote Antenna or ignition supply wire (if rem ant wire not available) on back of car stereo.
Please Note
- When connected your new stereo may not power up, and this is no fault of the wiring harness purchased.
- Audi / VW / Skoda / Fiat and other vehicles tend not to have an ignition switched live feed.
- In these cases it is necessary to manually connect a spurred live feed from fuse box for example to feed switched power so the new stereo turns on and off with the key.
- The wire in particular on the new wiring harness will be the red wire.
Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.
Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.