VW Transporter T5 2007> Car Stereo Fitting Kit Pocket Tray, Wiring Harness, Aerial Adaptor
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 1
- Brand: Dynamic Sounds
- Model: FKIT-VW-16
- EAN: 3778101751448
- Warranty: 2 Years Warranty
Available Options
Description
VW Car Audio Stereo Installation kit for installing a new after market single din headunit in your vehicle. This is complete kit including Pocket, Wiring Harness, Aerial Adaptor and keys.
Package Includes:
- Pocket Tray
- Wiring Harness with Aerial Adaptor
- Stereo Removal Keys
Product Compatibility Chart
| Make | Model | Years | Notes |
| Volkswagen | Transporter | 2007 onward |
Please Note:
Vehicles with Double Din size radio and ISO Connectors as Standard. Fascia Pocket will fill half the dash aperture to accept a single din stereo. Some Newer version may require a fascia also. If you have removal key slots on the original stereo, no fascia will be required.
There is an Aerial Adaptor also included with the Wiring Adaptor.
Please Note
- Red wire has to be connected to a separate ignition feed in the vehicle to make aftermarket head unit to power up
- Orange cable requires connection to illumination wire but only if the radio requires this for dimming purposes at night.
- Blue wire needs to be connected to the Remote Antenna or ignition supply wire (if rem ant wire not available) on back of car stereo.
Please Note
- When connected your new stereo may not power up, and this is no fault of the wiring harness purchased.
- Audi / VW / Skoda / Fiat and other vehicles tend not to have an ignition switched live feed.
- In these cases it is necessary to manually connect a spurred live feed from fuse box for example to feed switched power so the new stereo turns on and off with the key.
- The wire in particular on the new wiring harness will be the red wire.
Wiring Harness
The wiring harness will allow to install the stereo without having to cut any wires.
Please Note: You will need to connect the red wire to the ignition supply in the fuse box.
Stereo Removal Keys
Stereo Removal Keys to remove headunit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one of these units you will require a manufacturer specific stereo removal key to prevent damage to the head unit or the surrounding fascia and cage.
Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.
Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.
